General
Assembly arrangement	Basic element with complete housing
Model	2-pole switch
Number of poles	2
Method of operation	Key
Mounting method	Surface mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Type of fastening	Mounting with screw
Colour	White
RAL-number (akin)	9010
Suitable for degree of protection (IP)	IP55
Rated current	10 A
Nominal voltage	240
Number of buttons	0
Min. depth of built-in installation box	0 mm
Built-in depth	32
Built-in height	78
Built-in width	76
Connection type	Screwed terminal
Depth of device	89.9
Height of device	78
Width of device	76
Mechanical controllable
Electronic controllable
Halogen free
Transparent
Label space/information surface
For awnings
For roller blinds
IFTTT support available

Key switch, changeover switch 2 positions and imprint '1' and '2' AP W.1 polar white. Key changeover switch with imprint AP, separate input terminals, IP55, with lock, with identical locking mechanisms. For central locking systems, with 2 keys, key can be removed in 2 positions, with imprint for ON/OFF, with screw terminals, with an entry for 2 cables and an entry for a cable or pipe, full-surface seal under the housing base to seal the rear of the housing, easily accessible, funnel-shaped mounting holes in the housings, a Wago 2-wire connection terminal for wiring included, two snap-in positions for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow base), easy installation of the insert in the housing by snapping it into place, secure fixing of the frame to the housing via bayonet quick-release fastener, housing screws made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.