General
Wiring system	Two-way switch
Method of operation	Rocker/button
Assembly arrangement	Basic element with complete housing
Number of modules (module system)	1
Number of rockers	1
Mounting method	Surface mounted (plaster)
Type of fastening	Screw mounting
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	Blue
RAL-number (akin)	7011
Illumination	Optional
Function lighting	Illuminated (on)
Type of lighting	LED exchangeable
Suitable for degree of protection (IP)	IP55
Nominal voltage	250 V
Rated current	10
Switching current for fluorescent lamps	10
Connection type	Plug clamp
Width of device	76 mm
Height of device	76 mm
Depth of device	61.5 mm
Built-in depth	0 mm
Min. depth of built-in installation box	0 mm
Impact strength	IK07
Push button switch
With mounting plate
Halogen free
Label space/information surface
Feedback-signal contact
Washing machine switch
Antibacterial treatment
IFTTT support available

Control changeover switch AP W.1 gray. Control changeover switch AP with lens, IP55. For control circuit, with red LED unit 230 V for switch/button, with N terminal, with plug-in terminals, with an entry for 2 cables and an entry for cable or pipe, full-surface seal under the housing base to seal the rear of the housing, easily accessible, funnel-shaped mounting holes in the housing, a Wago 2-wire connection terminal for wiring included, two snap-in locations for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow floor), easy installation of the insert in the housing by snapping it into place, secure fixing of the frame to the housing via bayonet quick-release fastener, housing screws made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.