General
Assembly arrangement	Basic element
Method of operation	Turn/push button
Type of load	Universal and LED Retrofit
Mounting method	Flush mounted (plaster)
Type of fastening	Mounting with claw
Material	Metal
Material quality	Other
Surface protection	Untreated
Suitable for degree of protection (IP)	IP20
Nominal voltage	230
Frequency	60 Hz
Control voltage	230
Connection type	Screwed terminal
Core cross section	4
Width of device	71 mm
Height of device	71 mm
Depth of device	43 mm
Min. depth of built-in installation box	27 mm
App control via Bluetooth
Dimming phase cut-off
Serial dimmer
Substation input
Light value memory
Applicable with movement sensor
Applicable with presence indicator
Applicable with time switch/timer
Applicable with transmission button
Applicable with infrared button
Halogen free
Transparent
IFTTT support available

Universal rotary dimmer comfort (R, L, C, LED), soft locking, light control. Universal rotary dimmer comfort with extension input for button (normally open), single-surface operation, input for extension use for universal rotary dimmer, brightness memory, lamp-saving soft start, phase leading/trailing edge or LED phase leading edge depending on the type of load, self-learning, with incremental encoder, voltage test possible without removal, short-circuit proof and overload proof (electronic fuse), with screw terminals. Note: Do not connect inductive and capacitive loads together.