Further information for Berker 20342089 - Floor thermostat MS 1 / 3 polarwhite
General
Model
On/Off
Type of power supply
230 V AC
Connection
3-wire
Thermal feedback
Series
Control characteristic
Other
Number of heater outputs
1
Number of cooler outputs
1
Differential value
1 K
Sensor/feeler type
Resistance sensor
Mounting method
Flush mounted (plaster)
Operation
Turn
Max. contact voltage
230 V
Max. contact load
16 A
Degree of protection (IP)
IP30
Degree of protection (NEMA)
1
Colour
White
RAL-number
9010
Height
71 mm
Width
71 mm
Depth
50.2 mm
Diameter
71 mm
Class of the temperature control
I
Contact type
Normally open contact (NO)
Measuring range
40 °C
With receiver
External sensor
Adjustable differential
Temperature readable
With sound indicator
With display
With tap water circuit
Explosion-proof
IFTTT support available
Suitable for cooling
Suitable for heating
Floor temperature controller with normally open contact, Z.-piece, rocker switch, R.1/R.3 polar white, glossy. Floor temperature controller with normally open contact, central piece, rocker switch, 2 LEDs and floor temperature sensor, with print, control knob with temperature range limitation, with on/off switch and 2 LEDs, with LED for heating and LED for night-time reduction, with separate connection for night-time reduction, including floor temperature sensor, e.g. for actuators closed when de-energized, without spreading claws, with plug-in terminals, neutral conductor required, if the set temperature is not reached, the contact closes. Flush-mounted installation, standard range. Material: plastic, thermoplastic, shatter-proof, halogen-free. Floor temperature controller with normally open contact, central piece, rocker switch, 2 LEDs and floor temperature sensor, with print, control knob with temperature range limitation, with on/off switch and 2 LEDs, with LED for heating and LED for night-time reduction, with separate connection for night-time reduction, including floor temperature sensor, e.g. for actuators closed when de-energized, without spreading claws, with plug-in terminals, neutral conductor required, if the set temperature is not reached, the contact closes. Flush-mounted installation, standard range. Material: plastic, thermoplastic, shatterproof, halogen-free.