Further information for Berker 14078989 Center Piece Socket Glass pws glossy
General
Assembly arrangement
Central cover plate
Utilization
UAE/IAE (ISDN)
Outlet direction
Inclined
Imprintable label
Without indication field
Mounting method
Flush mounted (plaster)
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Colour
White
RAL-number (akin)
9010
Type of fastening
Mounting with screw
Number of modules (module system)
1
Suitable for number of connectors
1
Suitable for degree of protection (IP)
IP20
Width of device
55 mm
Height of device
55 mm
Depth of device
16.6 mm
Min. depth of built-in installation box
0 mm
Impact strength
IK02
Support ring
With dust cover
With hinged lid
With imprint
Halogen free
Transparent
With buses/couplings
With strain relief
Luster terminal
Antibacterial treatment
With lighting
The central component for UAE socket from the Berker switch range S.1/B.3/B.7 in polar white, glossy, serves as the central element for integrating communication technology into flush installations. It is specifically designed for use with RJ45 connectors required for Ethernet networks and other data communication applications. The glossy polar white surface enables an aesthetic integration into modern interiors and matches visually with common switch and socket ranges. Installation is carried out flush with screws, with mounting conditions adapted to the standard depth of flush-mounted boxes.
Central plate
The product is designed as a central plate, inserted into the flush-mounted box and establishing the electrical connection for the RJ45 connector. It is intended for use in systems of the S.1, B.3, and B.7 series, used in electrical installations for communication lines. The central plate features a slanted outlet, enabling optimal cable routing and simplifying wiring in the installation area.
Functions and equipment in detail
The central plate is designed for a single connection and supports the UAE/IAE plug type, commonly used in data communication. The surface is made of thermoplastic, untreated and glossy, with the colour polar white corresponding to RAL number 9010. The material is halogen-free and complies with REACh-SVHC and RoHS directive requirements, ensuring environmental compatibility and safety in use. The central plate has no labelling field or additional prints, providing a clean, minimalist appearance.
Technology explained simply
The dimensions are 55 mm in height, 55 mm in width, and 16.6 mm in depth, matching the installation size for standard flush-mounted boxes. The protection class IP20 safeguards against entry of solid foreign objects with a diameter of at least 12.5 mm and protects against finger contact, but not against water or dust. The impact resistance IK02 provides a certain level of protection against mechanical influences, such as light touches or impacts, which may occur during normal operation. Fixing is done with screws inserted into the flush-mounted box to securely fasten the central plate.
Compatibility and accessories
The central component is specifically developed for use in Berker systems S.1, B.3, and B.7, used in installation technology for communication lines. It is compatible with common frames and flush installation systems typical in electrical installations. Use with RJ45 connectors enables integration into Ethernet networks and other data communication systems. The central plate is not equipped with sockets, couplings, lampholder terminals, or strain relief devices, as it is exclusively intended for use as a central component in communication installations.
Installation and mounting
Installation is carried out flush, with the central plate inserted into the pre-fabricated flush-mounted box and secured with screws. The slanted outlet direction facilitates cable routing and prevents unnecessary stress on the cables. Mounting conditions are adapted to the standard depth of flush-mounted boxes, with no minimum depth specified. Installation requires no additional tools or components, as the central plate is designed as a standalone module.
Advantages in operation
The central plate provides a reliable and durable connection for RJ45 connectors in communication networks. The use of halogen-free thermoplastic ensures a safe and environmentally compatible material choice. The glossy polar white surface ensures a uniform visual appearance in indoor spaces. Compatibility with systems S.1/B.3/B.7 and simple flush installation facilitate installation and maintenance in daily operation. Protection class IP20 and impact resistance IK02 ensure reliable operation in indoor environments under normal conditions.