Belden YE03251001000

Belden YE03251+001000 1885EPE installation cable Cat7 black

Cables > Data lines > Installation cable Cat7

Belden YE03251+001000 1885EPE installation cable Cat7 black

Lieske Part No. 216274
Mfg Part No YE03251001000
EAN-Code
Manufacturer Belden
Here only 1,07 EUR
1,27 EUR incl. VAT

Further information for Belden YE03251+001000 1885EPE installation cable Cat7 black

General
CategoryCat7
Number of pairs4
Wire diameterAWG23
Degree of protectionFca
ColourBlack
Installation methodNot suitable for direct underground installation
The Belden 1885EPE is an installation cable of category Cat7, configured as 4x2xAWG23, in black. It is intended for data transmission in networks and designed for installation in indoor environments, particularly in structured cabling systems. The cable is not suitable for direct underground installation, but is designed for routing in ducts, trays, or shafts. It complies with protection class Fca, indicating a specific installation method suitable for use in enclosed installation systems.

Data cables for signal transmission in IT infrastructure are often subject to high requirements regarding bandwidth and immunity to interference. The Belden 1885EPE meets the Cat7 standards, enabling a maximum bandwidth of 600 MHz. This bandwidth is sufficient for data transmission in Gigabit and 10-Gigabit Ethernet networks, with the cable structure ensuring high signal integrity. The AWG23 conductors (American Wire Gauge 23) offer a balanced combination of conductivity and mechanical stability, suitable for indoor installation.

Installation cable Cat7 is designed for use in modern network infrastructures where high data rates and low signal distortion are required. The cable is intended for use in office buildings, server rooms, or other indoor areas where structured cabling is necessary. The black color is typical for installation cables in IT installations and allows visual differentiation from other cable types.

Technology explained clearly – The cable consists of four pairs of conductors, each pair individually shielded (S/FTP), to minimize electromagnetic interference. The overall shielding (Fca) provides additional protection against external interference. The AWG23 conductors have a cross-section of approximately 0.20 mm², ensuring sufficient conductivity for the intended applications. Installation is carried out in enclosed systems, and the cable must not be laid directly in the ground.

Compatibility and accessories – The cable can be combined with various accessories required for end-processing and installation. These include, for example, RJ45 connectors of category Cat6A suitable for field termination, as well as modular jacks such as the 130B11-Z modular Cat.6A 180° jack. Other compatible components include Cat.6A class EA cable connectors, stripping tools such as the Jokari PC-STRIPE stripper, and testing devices such as the LAN ScoutT Jr.2 to verify cable integrity after installation. However, using Cat7 cables also requires compatible connectors that meet at least the Cat7 standard to fully utilize the cable’s performance characteristics.

Installation and mounting – Installation is performed in enclosed cable ducts, such as wall or ceiling ducts, shafts, or cable trays. The cable is not intended for direct underground installation, as it lacks a special ground-laying protective layer or coating. Processing requires appropriate tools, such as stripping tools and crimping tools, to correctly connect RJ45 connectors. Connections should be made according to TIA/EIA-568-B or ISO/IEC 11801 standards to ensure reliable signal transmission.

Operational advantages – The cable offers high bandwidth and low signal distortion, which is critical for data transmission in high-speed networks. The shielding ensures high immunity to electromagnetic interference, which is particularly beneficial in environments with high electromagnetic noise. Use in structured cabling systems enables a clear and traceable network architecture, simplifying maintenance and fault diagnosis. The cable structure is designed for long service life, with materials and manufacturing meeting industry requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/216274
qrcode für Belden YE03251+001000 1885EPE installation cable Cat7 black