| General |
| Maximum measurement voltage | 600 V |
| Maximum measured current | 100 A |
| Current measurement method | Fixed fork |
| Accessories | AC285 set SureGrip crocodile clip 1610159 |
The Beha T5-600 EUR1 is a compact measuring instrument for performing voltage, current, and continuity measurements in electrical installations. It is specifically designed for use in electrical contracting and maintenance technology, where quick and safe testing of wiring, circuits, and electrical devices is required. The device enables measurements up to 600 V and features a current measurement function with a fixed jaw, allowing currents up to 100 A to be measured without interrupting the circuit. This functionality is particularly advantageous when testing installed wiring or devices where interrupting the current flow is not possible or desired.
Applications
The T5-600 EUR1 is suitable for use in electrical installation, maintenance of electrical systems, and industrial testing. It is frequently used to check voltages in low-voltage networks, determine load currents in consumers, and perform continuity testing on wiring. Measurements are taken directly on the conductor without requiring disconnection or opening of the circuit, which enhances work safety and reduces testing time.
Functions and Equipment in Detail
The device features an integrated current measurement function with a fixed jaw designed for measuring currents up to 100 A. The jaw allows the conductor to be simply placed into the opening, without interrupting the current flow. Voltage measurement is performed via standard test clips, suitable for connection measurements at terminals or plug connections. Continuity testing is used to check electrical conductivity between two points, for example, to test cables or switches for breaks.
Technology Explained Simply
Current measurement is based on the principle of magnetic induction: the fixed jaw generates a magnetic field proportional to the flowing current. This field is converted into an electrical signal, which is then displayed digitally. Voltage measurement is performed via a high-impedance input that picks up the voltage at the measurement point without affecting the current flow. Continuity testing uses a small test current flowing between two points; if a conductive path exists, an audible signal is triggered.
Compatibility and Accessories
For use with the T5-600 EUR1, the accessory AC285 set SureGrip crocodile clip 1610159 is available. These crocodile clips enable a secure and stable connection to terminals or conductors, particularly useful for continuity testing or measurements at hard-to-reach locations. The clips are designed for use with the measuring instrument and support precise measurements.
Mounting and Installation
The device is operated as a handheld instrument and requires no mounting. It is connected directly to the conductors or connection points to be tested. Measurement is performed by simply placing the jaw around the conductor (for current measurement) or connecting the test clips to the measurement points (for voltage and continuity). No additional tools or mounting procedures are required.
The measurement is taken directly on the conductor, without requiring disconnection or opening of the circuit, which enhances work safety and reduces testing time.
Advantages in Operation
The combination of voltage, current, and continuity measurement in a single device reduces the number of required measuring instruments and speeds up the testing process. The fixed jaw for current measurement enables safe and quick measurement without interrupting the circuit, which is particularly beneficial for operating systems. The integrated continuity testing supports rapid identification of breaks in wiring or circuits. The device is compact and easy to handle, making it suitable for mobile applications.
Batteries are not included in the delivery scope.