Beha 1616632, EAN: 0095969106887

Beha 1616632 TL910 test lead with replacement tips

Measurement > Other Measuring Devices

Beha 1616632 TL910 test lead with replacement tips

Lieske Part No. 429157
Mfg Part No 1616632
EAN-Code 0095969106887
Manufacturer Beha
Here only 121,60 EUR
144,70 EUR incl. VAT

Further information for Beha 1616632 TL910 test lead with replacement tips

General
Peak diameter1 mm
Maximum peak length100 mm
Cable length1 m
Replacement tips3 sets of spring-loaded gold-plated test probes, 2 sets of stainless steel test probes
The Beha TL910 is an electronic test lead, specifically designed for precise measurements at tight and hard-to-reach locations in electronics and measurement technology. The device features a very narrow probe tip with a diameter of 1 mm, enabling access to narrow component gaps, between printed circuit board components, or into tight bores. The maximum length of the probe tip is 100 mm, allowing even deep measurement points to be reached. The total length of the test lead is 1 m, providing sufficient reach for use in workshops or laboratories.

Applications

The TL910 is particularly suitable for testing and maintenance of electronic devices, printed circuit boards, circuits, and other compact assemblies where high precision and minimal mechanical stress on components are required. The narrow tip minimizes the risk of damaging sensitive components such as SMD components, transistors, or integrated circuits. The test lead is frequently used in the electrical engineering and electronics industry, as well as in service and maintenance operations.

Functions and Equipment in Detail

The product is supplied with an extensive set of replacement tips to increase the service life and versatility of the test lead. This includes 3 sets of spring-loaded gold-plated probe tips, ensuring a secure and conductive connection. The gold plating provides high corrosion resistance and prevents oxidation, maintaining measurement accuracy over a long period. Additionally, 2 sets of stainless steel probe tips are included, offering high mechanical strength and resistance to wear. The spring-loaded design of the tips ensures reliable contact, even on slightly uneven surfaces.

Technology Explained Simply

The probe tip with a 1 mm diameter is extremely slender, enabling access to tight measurement points where conventional test clips or wider tips cannot fit. The length of up to 100 mm allows deep penetration into assemblies without excessively stressing the test lead itself. The 1 m long cable provides sufficient clearance for handling and positioning. The spring-loaded tips ensure that contact is maintained even under slight pressure, improving measurement accuracy. The use of stainless steel and gold-plated contacts ensures high reliability and longevity.

Compatibility and Accessories

The TL910 is designed as a replacement or supplementary test lead set for measuring instruments equipped with corresponding connectors for test leads. The replacement tips are directly interchangeable and can be changed according to requirements—for example, in case of wear or for different applications. The spring-loaded gold-plated tips are particularly suitable for sensitive electronic measurements, while the stainless steel tips are appropriate for robust or mechanically demanding conditions.

Mounting and Installation

The probe tips are mounted by simply inserting them into the corresponding connectors of the test lead. No additional tools or mounting procedures are required. The spring-loaded design ensures that the tips securely fit in the connector and will not accidentally fall out. The cable itself is flexible and can be positioned without special precautions.

Advantages in Operation

The combination of a narrow tip, high length, and robust replacement tips enables flexible and precise measurement in demanding environments. The delivery with multiple tip types increases the product's lifespan and reduces replacement needs. The gold-plated contacts ensure a stable electrical connection, while the stainless steel tips offer high mechanical durability. The test lead is thus suitable for a wide range of applications in electronics and measurement technology.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/429157
qrcode für Beha 1616632 TL910 test lead with replacement tips