Beamerlampe, Emachines V700

Monitors > Projector-Accessories > Replacement Lamps

Beamerlampe, Emachines V700

Lieske Part No. 599794
Mfg Part No
EAN-Code
Manufacturer
Here only 37,76 EUR
44,93 EUR incl. VAT

Further information for Beamerlampe, Emachines V700

General
Lampbare
ManufacturerOsram
CompatibilityEmachines V700
Power200 W
This projector lamp is a bare lamp from the manufacturer Osram, specifically designed for use in the projector model Emachines V700. It serves as a replacement lamp to restore the light output and image quality of the projector when the original lamp is worn out or defective. The lamp is delivered without housing or additional components, which is typical for replacement lamps in the specialist trade, as installation takes place into the existing projector. The power rating is 200 watts, sufficient for the requirements of the Emachines V700 projector to ensure the intended brightness and color reproduction.

Applications
The lamp is exclusively intended for the Emachines V700 projector. It replaces the original projection lamp, which loses brightness or fails over time. Use in other projector models is not intended and may cause malfunctions or damage. The delivery time for projector lamps is stated to be approximately 1 to 3 weeks, so timely ordering is recommended.

Functions and Equipment in Detail
The bare lamp includes only the light source, i.e., the actual filament or discharge element, without housing, reflector, or electrical circuits. Installation takes place into the existing lamp housing of the projector, where the projector’s electrical connections and mechanical fixtures secure the lamp. The lamp is not equipped with additional components such as cables, filters, or protective caps. The power rating of 200 watts is designed for the projector’s operating voltage and provides the required energy for light generation.

Technology Explained Simply
The projector lamp functions as a light source in the projector system. In projectors, light is generated by a lamp and then projected onto a screen via lenses and mirrors. The bare lamp is a replacement part inserted into the existing lamp housing. The term bare means the lamp is delivered without protective housing or additional parts, requiring installation into the projector. The 200-watt power rating is a measure of the electrical energy the lamp consumes to produce light.

Compatibility and Accessories
The lamp is specifically designed for the Emachines V700 projector. Use in other projectors is not intended. The lamp is delivered without additional mounting aids, tools, or instructions.

Installation and Mounting
Installation involves removing the old lamp from the projector housing and inserting the new bare lamp into the existing lamp housing. The lamp must be correctly placed in the holder and electrically connected, with polarity and mechanical fit being critical. Installation requires access to the lamp compartment of the projector, typically achieved by opening a cover.

Operational Advantages
The use of a bare lamp enables a cost-effective and direct replacement solution, as no additional housings or components are required. The 200-watt power rating ensures the lamp provides the necessary energy for light generation in the Emachines V700 projector. The lamp is designed for replacement in existing projectors, thereby restoring image quality. The delivery time of approximately 1 to 3 weeks requires planned ordering to avoid operational interruptions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/599794
qrcode für Beamerlampe, Emachines V700