Further information for Bals 71105 protective contact mounting socket 16A IP44
General
Material
Plastic
Material quality
Thermoplastic
Flange size
75x75 mm
Degree of protection (IP)
IP54
Angle of plug
Straight
Connection system
Screwed terminal
Colour
Blue
RAL-number
5015
Number of poles
3
Nominal current
16
Nominal voltage
250
Halogen free
With hinged lid
The Bals protective earth contact add-on socket type 71105 is a fixed distribution device for use in electrical installations. It features a rated voltage of 250 V and a rated current of 16 A, designed for use in alternating current (AC) applications. The socket is designed as a 3-pole device (2P+PE), meeting requirements for earthing and safety in electrical installations. The housing is made of halogen-free thermoplastic, suitable for indoor use and under moderate environmental conditions. The device is blue, corresponding to RAL number 5015, with both the housing and the hinged cover finished in this color.
Applications
The socket is intended for use in fixed distribution systems, for example in industrial plants, workshops, or buildings with increased requirements for electrical safety. The protection class IP54 ensures protection against dust and splashing water from any direction, enabling use in areas with increased humidity or low mechanical stress. The socket is not intended for outdoor use or in heavily contaminated environments, as IP54 does not provide complete waterproofing or protection against large amounts of dust.
Functions and Equipment in Detail
The socket features a hinged cover that closes the socket when not in use, protecting it from mechanical damage and unauthorized access. The connection technology uses a screw terminal, ensuring a secure and durable connection. The maximum conductor cross-section is 4.0 mm², allowing use with standard installation conduits. The contacts are made of nickel-plated brass, ensuring high electrical conductivity and corrosion resistance. The contact carrier is made of polyamide, a robust and heat-resistant plastic, ensuring the mechanical stability of the device.
Technology Explained Simply
The socket is designed as an add-on device, connected from the rear. The plug orientation is straight, enabling direct connection to the distributor or cable. The flange dimensions are 75 mm in height and 75 mm in width, with a hole spacing of 60 mm. These dimensions allow easy mounting in standard distribution boxes or on panels. The device depth is 47.5 mm, limiting the installation height within the distributor. The socket is designed for the German system, meaning it complies with German electrical installation standards.
Compatibility and Accessories
The socket is designed for use in fixed distribution systems and can be combined with other Bals distribution components. The use of accessories such as protective caps, covers, or additional switches is possible, provided they are compatible with the dimensions and connection technology.
Mounting and Installation
Mounting is done by securing the device to a panel or distribution box using the pre-drilled holes in the flange. The connection terminals allow for secure cable connections, with the maximum conductor size of 4.0 mm² not to be exceeded. The socket is rear-connected, enabling direct connection to the cable. Installation must comply with applicable electrical regulations, particularly VDE standards.
Operational Advantages
The socket provides reliable and safe power supply for fixed applications. The use of halogen-free plastic reduces fire hazard and the formation of toxic fumes in case of fire. The IP54 protection class protects the device against dust and splashing water, increasing its service life and operational safety. The clear blue color (RAL 5015) facilitates identification and integration into existing installations.