| General |
| Degree of protection | IP67 |
| Operating voltage | 15...30 VDC |
| Transmission range | 2...8 mm |
| Analogue output | 0...10 V |
| Output characteristic | Falling with approach |
| Cutoff frequency -3 dB | 500 Hz |
| Repeatability according to BWN | ±12 µm |
| Maximum linearity deviation | ±180 µm |
| Housing material | Brass, nickel-plated |
| Active area, material | PBT |
| Connection | connector, M12x1 plug, 3-pole |
| Ambient temperature | -10...70 °C |
| Construction type | M18x1 |
| Built-in | Not flat |
| Approval/conformity | CE, UKCA, cULus, WEEE |
The inductive distance sensor BAW M18MG-UAC80F-S04G from Balluff is a non-contact measuring device for detecting positions and distances in industrial applications. It is particularly suitable for use in machine construction, where precise and reliable position monitoring is required, for example in assembly, stamping, or clamping devices. The sensors are wear-free and, due to their non-contact operation, have a long service life. The teach function enables quick commissioning, as the linearity range is adjustable, ensuring short downtime even when replacing the sensor.
Applications
The sensor is used in applications where movements, imbalances, or thermal expansions of axes must be detected. It is suitable for use in production plants, where continuous monitoring and high precision are required. The M18x1 housing design allows for easy integration into existing machine constructions, especially in environments where non-flush mounting is planned.
Functions and Equipment in Detail
The sensor provides an absolute analog signal, output as a voltage signal in the range 0...10 V. The output characteristic is falling, meaning that the output voltage decreases as the target object approaches the sensor. The sensing range is 2 to 8 mm, with a repeatability according to BWN of ±12 µm. The maximum linearity deviation is ±180 µm, ensuring high measurement accuracy even under fluctuating conditions. The active surface is made of PBT, a robust thermoplastic material suitable for industrial applications.
Technology Explained Simply
The technology is based on inductive measurement, where an electromagnetic field is generated and disturbed by the approach of a metallic object. This disturbance is converted into an electrical signal proportional to the distance of the object. The operating voltage is between 15 and 30 VDC, allowing flexible connection to various control systems. The cutoff frequency of 500 Hz indicates the maximum frequency at which the sensor still operates reliably, making it suitable for dynamic processes.
Compatibility and Accessories
The sensor is equipped with an M12x1 connector, 3-pole, enabling a standardized and secure connection to controls and wiring. The protection rating IP67 ensures dust- and water-tight construction, allowing the sensor to be used outdoors or in humid environments. The certifications CE, UKCA, and cULus confirm compliance with European and international safety and quality standards. The ambient temperature range is -10 to 70 °C, enabling use in a wide variety of industrial environments.
Mounting and Installation
The sensor is mounted non-flush, allowing easy installation on various surfaces. The housing is made of nickel-plated brass, providing high corrosion resistance and mechanical stability. The dimensions are Ø 18 mm x 65 mm, representing a compact design that saves space in limited mounting areas. The connector-based connection facilitates installation and maintenance.
Advantages in Operation
The non-contact measurement results in low wear and thus high operational reliability. The adjustable teach function reduces commissioning time and allows quick adaptation to new measurement conditions. The high repeatability and low linearity deviation ensure reliable measurement results. The IP67 protection rating and the robust construction from brass and PBT ensure a long service life even under demanding operating conditions.