Bachmann 910.175, EAN: 4016514014378

Bachmann 910.175 Schuko Plug Type 12 CH

Energy > Schuko plugs, couplings

Bachmann 910.175 Schuko Plug Type 12 CH

Lieske Part No. 669248
Mfg Part No 910.175
EAN-Code 4016514014378
Manufacturer Bachmann
Here only 4,26 EUR
5,07 EUR incl. VAT

Further information for Bachmann 910.175 Schuko Plug Type 12 CH

General
Degree of protectionProtective contact
Operating voltage250 V
Nominal current10 A
ColourBlack
MaterialThermoplastic
Maximum conductor cross-section3G1,00 mm²
Connector systemSwitzerland CH
Tension reliefYes
The Bachmann Schuko plug type 910.175 is an electrical plug designed for use in Switzerland (CH) and complies with the Swiss standard plug system. It is rated for an operating voltage of 250 V and a nominal current of 10 A, and is intended for the safe connection of electrical devices to the power supply. The plug is made of black thermoplastic and features an integrated earth contact, ensuring the grounding of the connected device. The strain relief design protects the connected cable from mechanical stress and prevents the plug from being pulled out due to tension on the cable.

Applications
This plug is suitable for use in households, commercial, and industrial environments in Switzerland, where the Swiss socket and plug standard (CH) applies. It is typically used with electrical devices having a power rating up to 2300 W (at 230 V), such as heaters, kitchen appliances, tools, or lighting fixtures. The strain relief makes it particularly suitable for applications where the cable may be subjected to mechanical stress, such as in workshops or with mobile equipment.

Functions and Features in Detail
The plug includes an earth contact, which ensures the grounding of the connected device and thus enhances electrical safety. The strain relief prevents the cable from being damaged by pulling forces at the plug connection. The maximum cross-section of the connected cable is 3G1.00 mm², allowing compatibility with standard household installations and flexible cables. The plug is made of black thermoplastic, a material known for its heat resistance and mechanical strength in electrical components.

Technology Explained Simply
The earth contact is an additional contact that ensures the device is grounded. In the event of a fault in the device, such as a short circuit between the live wire and the casing, the earth contact safely conducts the fault current to ground, reducing the risk of electric shock. The strain relief is a mechanical component that holds the cable in place within the plug and prevents it from being pulled out. This is especially important for frequent plugging and unplugging or with mobile devices. The specification 3G1.00 mm² refers to the maximum cable cross-section, comprising three conductors (e.g., live, neutral, earth) each with a cross-section of 1.00 mm².

Compatibility and Accessories
The plug is specifically designed for the Swiss socket and plug standard (CH) and will not fit into sockets of other countries without an adapter. Compatible accessories available in the range include a white Schuko plug Switzerland CH 10 A / 250 V, which is available in a similar design but in white color. This variant can be used as a replacement or for uniform color coordination if required.

Installation and Mounting
Mounting is performed by inserting the cable into the plug and securing it using the strain relief. The cable must be sized according to the specification up to 3G1.00 mm². The connection is made by inserting the cable conductors into the corresponding terminals inside the plug. No additional tools are required for mounting, provided the cable is properly prepared. The plug is to be used exclusively in conjunction with a Swiss socket (CH socket).

Operational Advantages
The plug provides a safe and reliable power supply for devices in Switzerland. The integrated strain relief increases the cable’s service life and prevents mechanical damage. The earth contact enhances electrical safety, particularly with devices prone to faults. The use of thermoplastic ensures high thermal and mechanical durability, increasing the plug’s longevity. The black color is standard, with a white version available as an accessory.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/669248
qrcode für Bachmann 910.175 Schuko Plug Type 12 CH