Features
Type	AV receiver
Maximum resolution	1920 x 1080 pixels
Cable types supported	Cat5e, Cat6, Cat6a
Maximum transfer distance	60 m
Supported video modes	1080p
Class	B
Material	Metal
Impedance	100 Ω
HDCP version	1.4
Product colour	Black
On/off switch
HDCP
Wall mountable
Logistics data
Master (outer) case width	342 mm
Master (outer) case length	512 mm
Master (outer) case height	232 mm
Master (outer) case gross weight	6.85 kg
Master (outer) case net weight	5.25 kg
Products per master (outer) case	5 pc(s)
Operational conditions
Operating temperature (T-T)	0 - 50 °C
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 80%
Packaging data
Package width	98 mm
Package depth	325 mm
Package height	210 mm
Package weight	1.24 kg
Ports & interfaces
RJ-45 input ports	1
Number of HDMI outputs	1
HDMI version	1.4
RS-232 input ports	1
Remote (IR) input	1
DC-in jack
Power
Operating voltage	5 V
Power consumption (typical)	9.5 W
Technical data
Class	B
Article type	Extender receiver
Length packaging	0.325m
Weight	1.270kg
Packaging volume	0.0067m³
Max. distance	70m
Width packaging	0.098m
Height packaging	0.210m
Aten Premium
Weight & dimensions
Width	169.2 mm
Depth	177.4 mm
Height	42 mm
Weight	1.05 kg

The VE805R HDMI HDBaseT-Lite Receiver with Scaler can be combined with ATEN HDMI HDBaseT products to extend your HDMI display up to 60 m from your HDMI source device using a single Cat 5e/6a cable.
With a built-in scaler, the VE805R supports scaling the display of different video resolutions. When combined with the ATEN VM8514 HDBaseT Output Board, it supports video wall integration and Seamless Switch™ functions. In addition, the VE805R is equipped with RS-232 and IR signaling pass-through, which allows RS-232 and IR channels to be controlled either from the remote to local unit or from the local to remote unit, for bi-directional control of the source or display device.
FeaturesHDBaseT Connectivity – extends the connection between the VM8514 HDBaseT outputs and an HDMI display over a long distance via single Cat 5e/6a cable
HDBaseT Anti-jamming – resists signal interference during high quality video transmissions using HDBaseT technology
Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners
Scaler – features a scaling function to integrate a video wall seamlessly with various output formats
Seamless Switch– close-to-zero second switching that provides continuous video streams, real-time switching and stable signal transmissions*
Video Wall – features configurable video wall profiles available for custom screen layouts via simple point-n-click web GUI*
Bi-directional IR channel – IR transmission is processed one direction at a time**
Rack-mountable
Note* The Seamless Switch and video wall functions are available when the VE805R is used with the VM8514.
** Supports full frequency IR signals from 30KHz to 60KHz; however the IR receiver cable included with the package only supports 30KHz to 56 KHz.
SpecificationsVideo InputInterfaces: 1 x RJ-45 Female (Silver)
Impedance: 100 Ohm
Video OutputInterfaces: 1 x HDMI Type A Female (Black)
Impedance: 100 Ohm
VideoMax. Data Rate: 6,75 Gb/s (2,25 Gb/s per lane)
Max. Pixel Clock: 225 MHz
Compliance: HDMI (3D, Deep Color) / HDCP 1.4 compatible / HDBaseT compatible
Max. Resolutions / Distance: Up to 1080p @60 m (Cat. 5e/6); 70 m (Cat. 6a)
ControlRS-232: 1 x Captive Screw Connector, 3 Pole
IR: 1 x Mini Stereo Jack Female (Black)
PowerConnectors: 1 x DC Jack (Sliver)
Consumption: 5 VDC, 9.5W
SwitchesFirmware Upgrade: 1 x Slide Switch
EnvironmentalOperating Temperature: 0-50°C
Storage Temperature: -20 - 60°C
Humidity: 0 – 80 % RH, Non-Condensing
Physical PropertiesHousing: Metal
Weight: 0,83 kg
Dimensions (L x B x H): 18,18 x 16,92 x 4,20 cm