Certificates
Compliance certificates	CE
Certification	EMC
Design
PDU types	Metered, Switched
Type	Three-phase
Rack capacity	0U
Product colour	Black
Display	LCD
Features
Cable length	3 m
Security algorithms	SMTP-AUTH, TLS
Daisy chain
Reset button
Logistics data
Country of origin	Taiwan
Master (outer) case net weight	7.51 kg
Master (outer) case width	229 mm
Master (outer) case length	1945 mm
Master (outer) case height	179 mm
Master (outer) case gross weight	10.2 kg
Master (outer) case volume	79853.5 cm³
Management features
Monitoring	Current, Power, Voltage
Supported network protocols	TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, ARP, NTP, DNS, Auto Sense, Ping, SNMP V1&V2&V3, Telnet, Modbus (over TCP/IP), Wi-Fi, 802.11 a/b/g/n, IPv6, SMS
Firmware upgradeable via	Network
Firmware upgradeable
Operational conditions
Operating temperature (T-T)	0 - 60 °C
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 80%
Packaging content
Manual
Rack mount kit
Packaging data
Package weight	10.2 kg
Package width	229 mm
Package depth	1945 mm
Package height	179 mm
Package volume	79853.5 cm³
Ports & interfaces
AC outlets quantity	30 AC outlet(s)
Power plug	IEC309
AC outlet types	C13 coupler, C19 coupler
Serial ports quantity	2
Ethernet LAN (RJ-45) ports	2
USB ports quantity	1
Power
Nominal input voltage	230 - 400 V
AC input frequency	50 - 60 Hz
Maximum current	16 A
Nominal output voltage	230 V
Load capacity	11084 VA
Circuit breaker
Sustainability
Sustainability compliance
Technical data
Cable	External
Weight	10.160kg
Mounting	Vertical
Max. output power	3680W
Width packaging	0.229m
Packaging volume	0.0797m³
Supply line	Power cable with IEC 60309 32A plug
Max. input power	11084VA
Output current	16A
Number of C19 sockets	6
Length packaging	1.945m
Input voltage	230V
Type	PDU
Number of C13 sockets	24
Height packaging	0.179m
Switch	Without
Input C20
Input C14
Measuring function
Input CE 16/32A
Protective function
Touch protection
Switching function
Weight & dimensions
Width	56 mm
Depth	1790 mm
Height	68 mm
Weight	7.36 kg

ATEN PG98230 3-Phase Outlet-Metered & Switched eco PDU series contains 6 x IEC 60320 C19 and 24 x IEC 60320 C13 outlets in a 0U rack enclosure. With an ARM Cortex-A8 processor, the PG98230 series delivers flexible control methods through its LAN / COM / USB / environment sensor ports as well as powers up all connected equipment in less than 10 seconds once plugged in. For cost-saving and space-efficient setup purposes, the PG PDUs can be cascaded to connect up to 64 PDU units. As a result, these PDUs accommodate the increasing demand for power to high-density IT devices in server rooms and data centers.
In terms of hardware design, these PDUs have built-in energy-saving relays, a subtype of electromagnetic switch, to help operators control large amounts of current flow, which results in lower energy consumption compared to non-relay models incapable of energy saving.
With five colors (yellow, red, purple, blue, and green) of LCD console panel stickers available for users to choose from, differentiating between power feed settings and speeding up troubleshooting are made easier. Plus, the LCD console panel is hot-swappable and can be removed, replaced, or repaired without powering down a mission-critical connected load.
Ideal for enterprise servers, network closets, and data centers, the PG series is an intelligent power distribution and management solution that supports high-density IT applications while minimizing the overall cost.Each PG PDU comes with 6 x IEC 60320 C19 and 24 x IEC 60320 C13 outlets in a 0U rack enclosure
ARM Cortex-A8 processor for flexible control methods via LAN / COM / USB / environment sensor ports and enhanced monitoring via LCD console
Advantageous hardware / network specification
1 Gbps and 100 Mbps Ethernet ports
Auto Ping & Reboot
Remote Management Protocols: TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, ARP, NTP, DNS, Auto Sense, Ping, SNMP V1&V2&V3, Telnet, Modbus (over TCP/IP), Wi-Fi, 802.11 a/b/g/n network protocols, IPv6, and SMS
Alerts / Alarms: receives alarms via SNMP, SMTP, SMS1, and syslog
Scripting: JSON-RPC (Remote Procedure Call) protocol and Python scripting to control specified PDU unit (e.g. Switch On / Off) 1
Security: 2-level account / password login access, and IP / MAC filter, TLS 1.2, SMTP / SMTPS protocols
Authentication: LDAP, RADIUS, TACACS+
Expandable installation
Allows for connecting up to 64 PDU units with cascading
Allows for PON port connection to an ATEN's KN series KVM over IP switch for centralized management of up to 16 cascaded PDUs2
Energy-efficient relays allow operators to control large amounts of current flow for lower energy consumption
Precise kWh metering (+/-1% ) for better power consumption habits, baselines, and initiative tracking
Environment sensor port enables RJ-45 connectivity to connect or daisy-chain up to 8 environment sensors such as ATEN EA1640 for monitoring and management of temperature, humidity, airflow, differential air pressure, and leaks
Real-time LCD alert sends warnings to alert users of unusual power state
An adjustable power cord is built in to the unit capable of 90-degree rotation to allow flexible in-rack installation, resulting in better cable organization
Rotatable LCD Screen – capable of 180-degree rotation, delivering flexible in-rack installation
Secure locking enhancement prevents power cords from becoming unplugged due to vibration or human error
Supports ATEN’s eco DC (Energy & DCIM Management Web GUI) for monitoring power distribution, energy, and environmental data from PDUs and connected devices
Note:
1. To be included in a future firmware release.
2. To be included in a future firmware release.
Package Contents1 x Power Distribution Unit
1 x rack mount kit
1 x RJ-45 to DB-9 cable
1 x full-panel colored sticker
1 x user instructions
FunctionPG98230G
Electrical
Nominal Input Voltage400/230V 3PH (Star)
Maximum Input Current16A Max
Input Frequency50-60 Hz
Input ConnectionG Plug: IEC 60309 16/20A Red 3P+N+PE
U Plug: Clipsal 20A 56PA52-EO Angled Plug
Input Power11084VA(Max)
Outlet Type(6) IEC 320 C19, (24) IEC 320 C13
Nominal Output Voltage230 VAC
Maximum Output Current (Outlet)C13:10A(Max),
C19:16A(Max),
BreakersNA
MeteringOutlet level Current, Voltage , PF and KWh Monitoring
Outlet SwitchingYes
Environment Sensor PortsYes
Metering Accuracy1%
Physical Properties
Dimensions (L x W x H)179.00 x 5.60 x 6.80 cm
(70.47 x 2.2 x 2.68 in.)
Weight7.36 kg ( 16.21 lb )
Power Cord Length3m
Environmental
Temperature (Operating / Storage)0 – 60? / -20 – 60?
Humidity (Operating & Storage)0 – 80% RH, Non-Condensing
Compliance
EMC VerificationCE, EMC
Safety VerificationCE, UL, PSE
Warranty3 years