Audio
Peak power per channel	120 W
Amplifier class	D
Input impedance	20000 Ω
Output impedance	160 Ω
Frequency range	80 - 20000 Hz
Logistics data
Master (outer) case width	370 mm
Master (outer) case length	427 mm
Master (outer) case height	232 mm
Master (outer) case gross weight	6.12 kg
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	0 - 80%
Packaging content
Manual
Packaging data
Package weight	1.82 kg
Package volume	9910.9 cm³
Ports & interfaces
Speakers connectivity type	Euroblock
AC (power) in
Microphone in
Power
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power protection features	Over voltage, Overheating, Overload, Under voltage
Maximum current	1 A
Technical data
Width packaging	0.207m
Length packaging	0.414m
Height packaging	0.117m
Colour	Black
Packaging volume	0.0100m³
Weight	1.819kg
Technical details
Purpose	Home
Connectivity technology	Wired
Product colour	Black
Material	Metal
Cables included	AC
Master (outer) case volume	36528.73 cm³
Compliance certificates	CE, UKCA
Country of origin	Taiwan
Sustainability compliance
Weight & dimensions
Width	157.2 mm
Depth	200 mm
Height	44 mm
Weight	1.23 kg

The AP106 is a 60W power amplifier with Hi-Z outputs capable of driving 70 V / 100 V audio systems. The support for balanced / unbalanced line level inputs enables superior sound quality and installation flexibility. Apart from the overall volume adjustment function, the built-in 2-band shelf EQ provides ± 6 dB boost / suppression of treble and bass control, offering subtle tone shaping and extra control versatility. As a result of the extra headroom this amplifier delivers, accommodating transient audio peaks and preventing distortion is never a problem to the AP106.
With Class D efficiency, the amplifier comes in a smaller, lighter enclosure, yet runs cooler comparing with other classes of amplifiers with the same amount of power. The fanless design helps eliminate operation shutdown brought by fan malfunction and ensures the amplifier not to be vulnerable to outside elements. Constructed in a compact, sealed casing, the AP106 approves of hidden placement, for instance, behind the TV, or even in the dusty environments, such as above the ceiling.
Speaking of the system protection circuit, the AP106, along with the speakers connected to it, is prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Built to be energy-efficient, the amplifier enters Power Saving Mode when no audio input is detectable in 30 minutes and turns back on when a source is detected. Additional features include the front panel LEDs that indicate the device status, plus the bi-directional RS-232 serial port that allows for firmware upgrade and easy integration with ATEN’s Control System, which acts as a centralized platform where hardware devices are converged to be monitored and controlled via an intuitive GUI. The AP106 is perfect for upgrading commercial or residential Pro AV systems where maintaining ultra-low distortion while exhibiting exceptional sound quality is required.A high-output power amp that delivers 60 W of power to 70 V or 100 V distributed audio systems
Built-in 2-band shelf EQ provides ± 6 dB boost / suppression of treble and bass control
Delivers extra headroom to accommodate transient audio peaks and prevent distortion
Fanless design eliminates operation shutdown caused by fan malfunction and ensures the amplifier not to be vulnerable to outside elements
Compact, sealed casing approves of hidden placement even in the dusty environments
Provides a wide range of professional audio equipment with easy, secure connectivity:Supports balanced and unbalanced line inputs on an Euroblock connector and a TRS jack (unbalanced input only)
Output for high-Z via an Euroblock connector
AC power on IEC receptacle for overseas operation
Power Saving Mode – the AP106 shuts down when no audio input higher than -50 dBu is detectable in 30 minutes and turns back on when a source reaches -30 dBu is detected
Integrated protection – Amp shortcut, Amp output over/under-voltage, high frequency overload, and overtemperature protection
Bi-directional RS-232 serial port allows for firmware upgrade and easy integration with ATEN’s Control System
Class D high efficiency and energy saving construction
Perfect for upgrading commercial or residential Pro AV systems where maintaining ultra-low distortion while exhibiting exceptional sound quality is required
Package Contents1x AP106 60W Mono Hi-Z Power Amplifier
1x 5-pin Euroblock connector with strain relief (3.5 mm)
1x 2-pin Euroblock connector with screw lock (5.08 mm)
1x 3-pin Euroblock connector without strain relief (3.5 mm)
1x power cord
1x foot pad set (4 pcs)
1x user instructions
System Specification
Rated Power60Wrms/ 120Wpeak
DistortionTHD+N:
Frequency Response80~20kHz, 0/-3dB @70V, 1W
SensitivityBalanced: +4dBu
Unbalanced: -10dBV
(0dBu=0.775Vrms, 0dBV=1Vrms)
Amplifier TypeClass D
HPF80Hz, -12dB/Oct
Audio Inputs
Interfaces1 x 5-pin 3.5mm Euroblock (Bal/Unbal Line In)
1 x 3.5mm TRS Unbalanced Phone Jack (Priority)
ImpedanceBalanced: 20kOhms
Unbalanced: 10kOhms
Detect Threshold-50dBu
Audio Outputs
Interfaces1 x 2-pin 5.08mm Euroblock
ImpedanceMinimum Load
70V: 80Ohms
100V: 160Ohms
Audio Effects2-band Shelf EQ, +/-6dB
ProtectionOutput Shortcut
AMP Output over/under voltage
High Frequency Overload
Thermal Protect
Communication
RS-232Connector: 3-pin, 3.5mm, Terminal Block
Baud rate and protocol:
Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
Power
Power Consumption100-240V~, 50/60Hz, 1A
Environmental
Operating Temperature0~40°C
Humidity0-80% RH, Non-Condensing
Storage Temperature-20~60°C
Physical Properties
Weight1.23 kg ( 2.71 lb )
HousingMetal
Dimensions (L x W x H)20.00 x 15.72 x 4.40 cm
(7.87 x 6.19 x 1.73 in.)
NoteRack/surface mount kits are sold separately.
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.