Further information for Aten 2L-7D02UD KVM cable DVI-D Dual Link USB audio black 1.8 m
Logistics data
Master (outer) case net weight
12.2 kg
Harmonized System (HS) code
84733080
Master (outer) case width
330 mm
Master (outer) case length
450 mm
Master (outer) case height
240 mm
Master (outer) case gross weight
13 kg
Products per master (outer) case
40 pc(s)
Packaging data
Weight
305 g
Package weight
305 g
Performance
Product colour
Black
Cable length
1.8 m
Video port type
DVI-D
Connector 1
DVI-D + USB A + 2 x 3.5 mm
Connector 2
DVI-D + USB B + 2 x 3.5 mm
Connector 1 gender
Male
Connector 2 gender
Male
Compatible products
CS1642
CS1644
CS1782A
CS1784A
CS1788
Technical data
Length packaging
0.195m
Weight
0.306kg
Design
Cable
Height packaging
0.035m
Width packaging
0.160m
Cable length
1.80m
Type 1
KVM cable set
Side A
DVI-D (Dual Link) 24+1 male x1, USB-A male x1, 3.5mm jack male x2
Type 2
DisplayPort/USB/Audio
Side B
DVI-D (Dual Link) 24+1 male x1, USB-B male x1, 3.5mm jack male x2
Packaging volume
0.0011m³
Colour
Black
Audio loudspeakers
Audio microphone
The Aten 2L-7D02UD is a KVM cable set for connecting a computer (source) to a KVM switch (console). It enables the transmission of video, USB signals, and audio over a single cable connection. The cable is finished in black and has a length of 1.8 m, making it suitable for typical office and workstation setups. It connects the interfaces of a computer to those of a KVM switch, enabling control of multiple computers via a shared keyboard, mouse, and monitor.
Applications
This cable is specifically designed for use with compatible Aten KVM switches, including models CS1642, CS1644, CS1782A, CS1784A, and CS1788. These devices allow central control of multiple computers via a single console. It is used in office environments, home offices, or professional IT infrastructures where efficient and organized management of multiple systems is required. The combination of DVI-D, USB, and audio connectors makes it particularly suitable for applications requiring not only screen and keyboard control but also the use of speakers and microphones via the console.
Functions and Features in Detail
At one end of the cable are the connectors for the computer: a DVI-D (Dual Link) 24+1 plug, a USB Type-A plug, and two 3.5 mm jack plugs for audio (microphone and speaker). At the other end, the connectors for the KVM switch are integrated: a DVI-D (Dual Link) 24+1 plug, a USB Type-B plug, and also two 3.5 mm jack plugs for audio. The use of Dual-Link DVI enables the transmission of high-resolution video signals, supporting even larger screen formats. The USB connection ensures communication with keyboard and mouse, while the audio plugs enable the transmission of voice and audio signals.
Technology Explained Simply
The DVI-D (Dual Link) standard enables the transmission of digital video signals at high resolution, with the Dual-Link variant using two data channels to support higher resolutions and refresh rates. The USB connection handles data transmission between the console and the computer, enabling the transfer of keyboard and mouse commands. The 3.5 mm jack plugs are used for audio signal transmission, with one plug designated for microphone (input) and one for speaker (output). The cable is equipped with plugs at both ends, allowing for direct connection without additional adapters.
Compatibility and Accessories
The cable is specifically developed for use with the mentioned Aten KVM switch models. It is not a universal cable but tailored to the interfaces of these devices. Compatibility with models CS1642, CS1644, CS1782A, CS1784A, and CS1788 is explicitly confirmed. Use with other KVM switches is not guaranteed, as interface configurations may vary. Combining it with the specified switches enables central control of multiple computers via a shared console.
Installation and Mounting
Installation is performed by directly connecting the cable ends to the corresponding interfaces: at the source (computer), the connectors are attached to USB, DVI, and audio ports; at the KVM switch, the corresponding sockets are used. The connection is mechanically stable and requires no additional tools. The cable length of 1.8 m provides sufficient flexibility for typical workstation configurations. The connection is immediately operational once the physical connections are made.
Operational Advantages
The cable combines multiple functions into a single cable, simplifying cabling and keeping the workspace organized. The use of Dual-Link DVI enables the use of high-resolution monitors. The integrated audio transmission allows the use of speakers and microphones via the console, which is particularly useful for remote maintenance or video calls. The robust construction and use of standard connectors ensure reliable and interference-free signal transmission. The cable connection is easy to handle and requires no additional adapters or converters.