The Arctic Alpine 64 PRO Rev.2 is a CPU cooler for AMD processors, designed for quiet and efficient cooling performance. It combines an aluminium heatsink with a 9.2 cm PWM-controlled fan, which adjusts its speed according to the current CPU load. The combination of the large heatsink surface and efficient fan ensures low noise levels, with the cooler achieving a noise level of 0.4 Sone according to manufacturer specifications. The pre-applied thermal paste enables quick and clean installation without additional preparation.
Applications
The cooler is specifically designed for AMD systems and supports socket types AM2+, AM3+, AM4, FM1, and FM2+. It is suitable for standard applications where sufficient cooling performance is required at low noise levels. The maximum cooling capacity is 90 W, which is sufficient for many mainstream and mid-range CPUs. Installation is performed using a push-pin system, ensuring easy and secure mounting.
Features and Equipment in Detail
The fan features a fluid dynamic bearing, which enables long service life and low noise levels. The rotational speed varies between 500 and 2000 RPM, with PWM control dynamically adjusting the speed. This results in reduced noise levels under low load and sufficient cooling performance under high load. The airflow reaches up to 77 m³/h (equivalent to 45 cfm), ensuring efficient heat dissipation. The pre-applied thermal paste is optimized for first use; for reinstallation, Arctic recommends using the MX-4 thermal paste.
Technology Explained Simply
The heatsink is made of aluminium, which is ideal for CPU coolers due to its high thermal conductivity and low density. The large surface area of the heatsink enables efficient heat dissipation into the surrounding air. The fan draws air through the heatsink, enhancing heat removal. PWM control (pulse width modulation) electronically regulates the fan speed, allowing noise levels to be reduced depending on the load. The 0.4 Sone rating describes the subjective noise perception; a value below 1 Sone is considered very quiet. The pre-applied thermal paste ensures optimal heat transfer between the CPU and heatsink.
Compatibility and Accessories
The cooler is compatible with the specified AMD sockets and adapts to various motherboard platforms via the push-pin mounting system. Installation requires no additional tools. Manufacturer specifications refer exclusively to the mentioned sockets; no further compatibilities are specified. The thermal paste is pre-applied to the heatsink, simplifying installation.
Installation and Mounting
Installation is performed using the push-pin system, enabling quick and secure fastening. Before mounting, the CPU surface should be thoroughly cleaned to remove any residue from previous thermal paste. The pre-applied paste does not need to be replenished unless the cooler is reinstalled, in which case Arctic recommends using MX-4 paste. The installation instructions are included in the manufacturer’s datasheet.
Advantages in Operation
The cooler is distinguished by its quiet operation, achieved through the combination of PWM control, fluid dynamic bearing, and optimized fan design. The maximum cooling capacity of 90 W is sufficient for many standard and mid-range CPUs. Easy mounting and pre-applied thermal paste reduce installation effort. The warranty is six years, indicating the high quality of the components used. Dimensions are 105 mm (width) × 113 mm (height) × 78 mm (depth), which should be considered when planning internal case space. The cooler weighs 428 g, which is in the lower to mid-range for a standard CPU cooler.