ALLNET meeting room LED tablet 13 inch RK3399 Android 10 and RFID (NXP Mifare, Desfire)
Includes power supply and integrated snap-in wall mount with theft protection. RGB LED for displaying, for example, warning signals, occupancy of meeting rooms, etc.
NFC can also be used to implement time recording terminals or information terminals with ID, such as multi-unit residential complexes.
Currently tested Android time terminal software: PDS time works, but the config file has to be imported manually, the camera is not addressed. According to the manufacturer, AIDA time works with our article numbers 174715/174716/174717/174888 and 182897 The API/SDK for NFC/RFID and LED We are happy to provide it upon request.
Specifications NFC: NXP PN7150
PN7150 is a full-fledged NFC controller solution with integrated firmware and NCI interface for contactless communication at 13.56 MHz. It is compatible with NFC Forum requirements.
PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those working with O/S environments such as Linux and Android.

• Full NFC Forum compliance with small form factor antenna
• Embedded NFC firmware that offers all NFC protocols as a pre-integrated feature
• Direct connection to the main host or microcontroller, through physical I2C bus and NCI
protocol

• Ultra-low power consumption in polling -Loop mode
• Highly efficient integrated power management unit (PMU)
• supported RF protocols
NFCIP-1, NFCIP-2 protocol (see [8] and [11])
ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3])
NFC Forum T3T via host interface
ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP
FeliCa PCD mode
MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K)
NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1])
ISO/IEC 15693/ICODE VCD mode (see [9])
Further information can be found in the NFC data sheet.System CPU RK3399RAM 2GB (4GB from Batch 2023)Internal memory 16GBOperation system Android 10
Display Touch screen 10-Point capacitive touchPanel 33 cm ( 13 inch ) LCD panelResolution 1920x1080Active area 293(H)x164mm(V)Display mode Normally black ,IPSViewing angle 85/85/85/85(L/R/U/D)Contrast ratio 800Luminance 280cd/ m2Aspect Ratio 16:9Network WiFi 2.4/5GHz 802.11a/b/g/nEthernet 100M/1000M ethernetBuletooth Bluetooth 4.0Interface Card slot SD cardUSB USB HostMicro USB Micro USB OTGUSB USB for serialRJ45 with POE RJ45 POE IEEE802.3atPower jack DC power inputEarphone 3.5mm earphoneMedia play Video format MPEG-1,MPEG-2,MPEG-4,H.263,H.264,VC1,RV etc.,support up to 4KAudio format MP3/WMA/AAC etc.Photo jpeg, png, etc .Other VESA 204.5mmNFC NFC with 13.56M frequency)/RFID NXP DesfireCamera 2.0M/P,Front cameraMicrophone MicrophoneSpeaker 2*1.5WLED Light bar LED light bar with RGB and mixed colorWorking temp 0--40degreeCertificates CE/FCC/RoHSLanguage Multi-languageAccessories Adapter adapter, 12V/2.5AUser manual yes