| General |
| Capacity | 22 nF |
| Number of capacitors | 4 |
| Nominal voltage | 440 V |
| Frequency range | 1-40 MHz |
| Temperature range | -25 to +100 °C |
| Connection type | screw terminal M3,5 |
| Test voltage X-value | 3000 V DC |
| Housing | Epoxy resin/polyurethane |
| Mounting method | DIN rail mounting |
| Capacitance deviation | ±20 % |
The Allnet phase coupler KC002-923/271-500 is a passive network transmission coupler for three-phase AC networks, developed for coupling Powerline networks across phase boundaries. It enables the connection of networks located on different phases of the electrical supply network and is specifically designed for use in industrial or commercial electrical installations. The coupler is equipped with an LX interface, supporting communication across various power networks, for example between sub-distribution boards or across RCDs and electricity meters. The frequency bandwidth of 1 to 40 MHz covers the relevant range for Powerline technologies and ensures stable data transmission over the power network. The product is CE- and VDE-certified, confirming compliance with European safety and functional standards.
Applications
The phase coupler is used in electrical installations where Powerline networks must be connected across multiple phases or across RCDs. This is typical in larger buildings, factories, or industrial areas where power supply is distributed across multiple phases. The coupling is passive, requiring no additional power supply, and enables data transmission over the existing power network. Installation is carried out after the RCD, ensuring the coupler is installed in the protected area of the installation. According to the manufacturer, only the article ALL16881PC is permitted for coupling across RCDs and electricity meters.
Functions and Equipment in Detail
The coupler consists of four X2 capacitors, each with a nominal capacitance of 22 nF, connected in series (4 x 2 in series), resulting in a total capacitance of 11 nF. The allowable capacitance deviation is ±20 %. The nominal voltage is AC 440 V, making it suitable for use in industrial networks with higher voltage. The operating temperature ranges from -25 °C to +100 °C, enabling use in various environments, including industrial installations with high heat generation. Connections are made via M3.5 screw terminals, ensuring a secure and durable connection. The housing is encapsulated in epoxy resin/polyurethane, providing high mechanical stability and insulation properties.
Technology Explained Simply
The phase coupler uses the principles of capacitive coupling to transmit high-frequency signals (1–40 MHz) over the electrical network without affecting the low-voltage supply. The X2 capacitors filter the high-frequency signals and pass them between phases while blocking the mains voltage. The LX interface enables connection to other networks located across different electricity meters or RCDs. The test voltage for the X value is 3000 V DC for 2 seconds, confirming the electrical strength of the device. The design is intended for use in enclosed switchgear, with DIN rail mounting according to EN 50 022 enabling installation in standard switchboards.
Compatibility and Accessories
The phase coupler is specifically designed for use with Powerline networks operating in the frequency range of 1 to 40 MHz. According to the manufacturer, only the article ALL16881PC is permitted for coupling across RCDs and electricity meters. The use of other devices for this application is not recommended and may lead to malfunctions or safety risks. Compatibility with other Powerline systems depends on the frequency bandwidth and signal transmission technology, which must lie within the 1–40 MHz range.
Installation and Mounting
Installation must be carried out exclusively by authorized specialist workshops, as explicitly stated in the product description. The installation must be performed after the RCD to ensure the safety of the installation. The device is mounted using DIN rail mounting according to EN 50 022 in switchgear. Connections are made via M3.5 screw terminals, ensuring a secure connection. Adherence to mounting instructions is essential for the functionality and safety of the device.
Operational Advantages
The passively operating phase coupler requires no additional power supply and is therefore low-maintenance. Capacitive coupling enables reliable data transmission across phase boundaries without affecting the electrical supply. The high operating temperature and robust construction from epoxy resin/polyurethane ensure a long service life even in demanding environments. The CE and VDE certification confirms compliance with relevant safety and functional standards.