Allnet HG5817D, EAN: 8223350694428

Allnet HG5817D antenna 5.8 GHz 17 dBi backfire outdoor N-Type

Networks > Wireless Networking > Antennas

Allnet HG5817D antenna 5.8 GHz 17 dBi backfire outdoor N-Type

Lieske Part No. 803611
Mfg Part No HG5817D
EAN-Code 8223350694428
Manufacturer Allnet
Here only 11.998,80 EUR
14.278,57 EUR incl. VAT

Further information for Allnet HG5817D antenna 5.8 GHz 17 dBi backfire outdoor N-Type

General
Frequency range5725-5850 MHz
Gain17 dBi
Horizontal beam angle25 degree
Vertical beam angle25 degree
Front-to-back ratio>25 dB
Impedance50 Ohm
VSWR< 1.5 1:1
Maximum input power20 Watt
ConnectionN-type female connector
Radome materialUV-inhibited polymer
Operation temperature-40 to 85 °C
Wind load>130 MPH
Mast diameter2 inch
PolarizationVertical and horizontal
Mast mounting60 degree inclination, swivelling
RoHS compliantYes
The Allnet HG5817D is a compact backfire antenna for the 5.8 GHz ISM and UNII frequency band, designed for outdoor use. It offers a gain of 17 dBi and a radiation pattern of 25 degrees horizontally and vertically, making it particularly suitable for directional applications such as point-to-point connections, wireless bridges, or backhaul systems. The antenna is adjustable for operation in vertical or horizontal polarisation, allowing flexible adaptation to various network requirements.

Applications

The HG5817D is designed for applications in the 5.8 GHz band, including wireless LAN systems, point-to-multi-point networks, and backhaul connections. Its compact design minimises wind load, making it suitable for installations on masts or open areas. The robust, weather-resistant construction enables reliable operation under various environmental conditions, even at extreme temperatures.

Features and Equipment in Detail

The antenna features an N-type female connector, intended for connection to compatible cables and devices. An integrated DC ground connector provides protection against lightning strikes. The antenna is supplied with a mast mounting kit, enabling an inclination of up to 60 degrees and swivelling motion to ensure optimal alignment. The radome housing is made of UV-resistant polymer, protecting the internal antenna structure from weather influences.

Technology Explained Simply

The gain of 17 dBi means that the antenna amplifies the received or transmitted signal strength by a factor of 10^1.7 (approximately 50 times) compared to an isotropic reference antenna. The radiation angles of 25 degrees in horizontal and vertical directions result in a narrow, focused beam, ensuring long range and minimal interference. The front-to-back ratio of over 25 dB ensures that the signal behind the antenna is significantly attenuated, minimising interference from the rear. The impedance of 50 ohms and a VSWR under 1.5:1 ensure efficient energy transfer and minimise reflections.

Compatibility and Accessories

The antenna is equipped with an N-type female connector, allowing it to be connected to cables featuring an N-type male plug. Compatible cables are available, for example, LMR-195 cables with N-type(m) or R-SMA(m) on one end and N-type(m) or R-SMA(f) on the other. An antenna T-piece N-type female (f) to 2x N-type female (f) enables signal splitting. The antenna is designed for masts with a diameter of up to 2 inches (50.8 mm).

Mounting and Installation

Mounting is performed using the included mast mounting kit, which allows an inclination of up to 60 degrees and swivelling motion. The antenna can be mounted on masts with a diameter up to 50.8 mm. Installation does not require special tools, but secure fastening is necessary to withstand wind loads at high wind speeds (over 130 mph / 210 km/h).

Operational Advantages

The weather-resistant construction and UV-resistant radome ensure long service life even under intense sunlight and rain. The compact form reduces wind load, increasing stability and reducing the need for additional stabilisation. The operating temperature range of -40 °C to 85 °C enables use in extreme climatic conditions. RoHS compliance confirms adherence to the EU directive on the restriction of hazardous substances in electrical equipment.

The antenna is designed for outdoor use and is suitable for professional networking applications requiring high signal quality and reliability. The technical specifications are designed for operation within a frequency range of 5725 to 5850 MHz, with a maximum input power of 20 watts. The antenna is not intended for indoor use, as it was specifically developed for outdoor mounting.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/803611
qrcode für Allnet HG5817D antenna 5.8 GHz 17 dBi backfire outdoor N-Type