Allnet F066.110/016-013, EAN: 4038816654472

Allnet F066.110/016-013 notch filter 2,0–40 MHz 16 A

Networks > Powerline

Allnet F066.110/016-013 notch filter 2,0–40 MHz 16 A

Lieske Part No. 810168
Mfg Part No F066.110/016-013
EAN-Code 4038816654472
Manufacturer Allnet
Here only 181,44 EUR
215,91 EUR incl. VAT

Further information for Allnet F066.110/016-013 notch filter 2,0–40 MHz 16 A

General
Frequency range2,0-40 MHz
Nominal voltage250 V
Nominal current16 A
Temperature range-25 to +100 °C
Mounting methodDIN rail
Connection typescrew terminal M3,5
Choke inductance12 μH
Capacity0,24 μF
ManufacturerEichhoff
The Allnet Powerline blocking filter, type F066.110/016-013, is a specialised filter for use in Powerline networks, particularly in larger installations such as hotels or office buildings. It is designed to separate individual segments of the power supply from each other, stabilising signal transmission over the electrical network and preventing mutual interference between segments. The function is based on filtering the frequencies used for Powerline technology, thereby preventing signals within one segment from reaching adjacent areas. This enables an orderly and interference-free network connection over existing power lines.

Applications

The filter is designed for use in industrial and commercial environments where a structured and scalable network architecture over the existing electrical installation system is required. It is particularly suitable for applications where multiple independent Powerline networks are operated in parallel without interfering with each other. Mounting is done on DIN rails, enabling integration into existing enclosures or distribution boxes. The operating temperature ranges from -25 °C to +100 °C, allowing use in various environmental conditions, including industrial facilities.

Functions and Equipment in Detail

The blocking filter operates in the frequency range of 2.0 to 40 MHz, which corresponds to the standard range for Powerline transmissions. It is rated for a nominal voltage of AC 250 V and a nominal current of 16 A, making it suitable for use in medium to high-load applications. Electrical isolation is achieved through an integrated choke system, consisting of an inductance of 12 μH and a capacitance of 0.24 μF, specifically dimensioned for filtering Powerline frequencies. Connections are made via screw terminals M3.5, ensuring a secure and reliable connection.

Technology Explained Simply

The technology of the filter is based on selective suppression of high-frequency signals used for data transmission over the power grid. The integrated choke (inductance) acts as a barrier to high-frequency signals, while the capacitance diverts interference in the Powerline frequency range. This prevents signals from one network segment from being transmitted to another, which could lead to interference and data loss. The use of PU potting (polyurethane) ensures mechanical stability and protection against environmental influences. The housing design is intended for mounting on DIN rails, enabling standardised installation in electrical distributors.

Compatibility and Accessories

The filter is compatible with all Powerline systems operating in the frequency range of 2.0 to 40 MHz. It can be used in combination with Powerline adapters, routers, or switches to ensure network segmentation. Use in larger installations requires planned distribution of the filters to achieve the desired segmentation of segments.

Mounting and Installation

Mounting is done on DIN rails, with screw terminals M3.5 used for electrical connections. Installation must be carried out by authorised specialist workshops to ensure compliance with electrical regulations and safety requirements. The filter is positioned at the transitions between the network segments to be separated, with correct connection sequence (L, N) to be observed. The maximum operating temperature of +100 °C requires sufficient ventilation in the enclosure to prevent overheating.

Advantages in Operation

The use of the blocking filter enables clear segmentation of Powerline networks, improving signal quality and data transmission reliability. Segment separation prevents interference that could arise from overlapping frequencies, ensuring stable network performance. The high current capacity of 16 A and robust construction make the filter suitable for use in demanding environments. DIN rail mounting allows flexible and standardised integration into existing electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/810168
qrcode für Allnet F066.110/016-013 notch filter 2,0–40 MHz 16 A