| General |
| Attenuation at 2.4 GHz | ca. 3,8 dB |
| Attenuation at 5 GHz | ca. 6,0 dB |
| Conductor | Cu-stranded wire, bare Diameter: 0.97 mm |
| Insulation | SPE Diameter: 2.67 mm |
| Outer conductor | Aluminium foil |
| Cu braid | Tinned 85% optical coverage |
| Colour | Black |
| Bend radius (without tension load) | Installation, single - 15 mm; multiple - 75 mm |
| Temperature range | -40 to +85 °C |
The Allnet ANT-CAB-RSMA-N-500 is a coaxial cable from the LMR-195 series, designed for use in wireless communication networks. It connects an R-SMA plug to an N-type plug and has a length of 500 cm. The cable is used for transmitting high-frequency signals between wireless devices and external antennas, for example in WLAN infrastructures, router systems, or industrial wireless applications. The connection is made via a robust coaxial construction, ensuring high signal integrity.
Antenna cable
This cable is specifically designed for use in wireless networks, where the connection between an R-SMA plug and an N-type plug represents a standard combination in ITK and radio technology. This plug connection enables a secure and mechanically stable attachment of antennas to routers, access points, or other wireless devices. The length of 500 cm provides sufficient flexibility for positioning the antenna relative to the device without disproportionately affecting signal quality.
Functions and equipment in detail
The cable features a solid copper inner conductor with a diameter of 0.97 mm, which ensures low signal attenuation. The insulation is made of SPE (special polyethylene), providing stable electrical insulation and maintaining a constant impedance of 50 Ohm. The outer conductor consists of an aluminium foil covered with a tinned copper braid, achieving a shielding coverage of 85 %. This ensures effective protection against electromagnetic interference. The jacket is made of PUR (polyurethane), halogen-free, and black in colour, providing high mechanical strength and weather resistance.
Technology explained simply
The cable's attenuation is approximately 3.8 dB at 2.4 GHz and 6.0 dB at 5 GHz. These values indicate how much the signal is attenuated as it passes through the cable. Lower attenuation means better signal transmission. The stated values are typical for LMR-195 cables and suitable for use in WLAN systems. The 50 Ohm impedance is the standard impedance for wireless applications, ensuring optimal signal transmission without reflections. The cable is designed for temperatures from -40 to +85 degrees Celsius, enabling use in indoor and outdoor environments, even under extreme climatic conditions.
Compatibility and accessories
The cable is compatible with devices that support R-SMA and N-type connectors. These connectors are commonly found in many WLAN routers, access points, industrial wireless modules, and other wireless devices. Using the cable requires no additional adapters, as the plugs connect directly to the corresponding sockets. No accessories or additional adapters are required to use the cable.
Installation and mounting
During installation, the specified bending radius must be observed. Without tensile load, the bending radius is 15 mm for single bends and 75 mm for multiple bends. This prevents mechanical damage to the cable and ensures long-term functionality. Installation is done by simply inserting the plugs into the corresponding sockets of the devices. No additional tools or mounting aids are required.
Advantages in operation
The cable offers high mechanical stability due to the PUR jacket and the robust construction of the outer conductor. The halogen-free material selection reduces the formation of toxic smoke gases in case of fire. The temperature resistance from -40 to +85 degrees Celsius allows use in a wide range of environments, including industrial facilities, outdoor areas, or in air conditioning systems. The low attenuation ensures efficient signal transmission, which is particularly advantageous for longer connections.