Allnet ANT-CAB-LMR195-SMAM-NM-150, EAN: 4038816046925

Allnet ANT-CAB-LMR195-SMAM-NM-150 Antenna Cable SMA N 150cm

Networks > Wireless Networking > Antennas

Allnet ANT-CAB-LMR195-SMAM-NM-150 Antenna Cable SMA N 150cm

Lieske Part No. 771653
Mfg Part No ANT-CAB-LMR195-SMAM-NM-150
EAN-Code 4038816046925
Manufacturer Allnet
Here only 9,25 EUR
11,01 EUR incl. VAT

Further information for Allnet ANT-CAB-LMR195-SMAM-NM-150 Antenna Cable SMA N 150cm

General
Cable typeLMR-195
ColourBlack
The Allnet antenna cable ANT-CAB-LMR195-SMAM-NM-150 is a specialised connection cable for wireless networks, particularly in the field of LTE and other mobile communication applications. It is designed for secure and interference-free transmission of high-frequency signals between antennas and network devices. The cable connects an SMA male connector at one end with an N-type male connector at the other end, making it compatible with a wide range of devices that support these connector types. The length is 150 cm, providing sufficient reach for typical installations in indoor and outdoor environments. The cable is finished in black colour, making it visually discreet and simultaneously protecting it against UV radiation.

Applications
This cable is designed for use in mobile communication and wireless networks, particularly in LTE systems. It is commonly used in the installation of external antennas for routers, modems, or other network devices where a connection between the device and an external antenna is required. The use of LMR-195 as the cable type ensures high signal integrity and minimises losses during signal transmission, which is especially important at higher frequencies. Due to its robust construction, it is suitable for both indoor and outdoor use, provided the mounting conditions meet the requirements.

Functions and Features in Detail
The cable features an SMA male connector at one end and an N-type male connector at the other end. These connectors are widely used in the industry and enable a secure, mechanically stable, and electrically conductive connection. The SMA connector is often found on smaller devices such as routers or modems, while the N-type connector is commonly used on larger antennas or base stations. This connection is therefore ideal for attaching external antennas to network devices. The length of 150 cm provides sufficient flexibility for installation without the cable being excessively long or too short.

Technology Explained Simply
The cable is based on the LMR-195 cable type, a low-loss cable optimised for the transmission of high-frequency signals. It is characterised by low attenuation, meaning the signal loses only minimal strength over the entire cable length. This is crucial to maintain signal quality and the range of the wireless network. The use of SMA and N-type connectors ensures high mechanical stability and a reliable electrical connection. The black colour of the cable serves not only aesthetic purposes but also protects the cable material from UV radiation, extending its service life.

Compatibility and Accessories
The cable is compatible with devices featuring SMA male and N-type male connectors. This includes a wide range of LTE routers, mobile communication modems, antennas, and other wireless devices. It can be used as a replacement cable or an extension cable to establish the connection between device and antenna. The use of LMR-195 cables is common in the industry, as they offer a good balance between signal quality and mechanical robustness. No special accessories are required to use the cable; the connectors are ready for immediate use.

Installation and Mounting
Installation is performed by simply plugging the two connectors into the corresponding sockets on the devices. It is important to ensure that the connectors are fully and securely connected to guarantee reliable signal transmission. When mounting outdoors, the cable should be protected from mechanical stress and weather influences, for example by using protective conduits or cable protection ducts. The length of 150 cm allows for flexible antenna placement relative to the device.

Operational Advantages
The cable provides reliable and stable signal transmission with minimal losses, supporting the performance of the wireless network. The use of SMA and N-type connectors ensures universal compatibility with many devices. The length of 150 cm offers sufficient flexibility for installation without the cable being excessively long. The black colour and robust construction ensure a long service life and seamless integration into the installation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/771653
qrcode für Allnet ANT-CAB-LMR195-SMAM-NM-150 Antenna Cable SMA N 150cm