Allnet ALL95102O, EAN: 4038816107046

Allnet ALL95102O Surge Protector Cat6 outdoor IP66

Allnet ALL95102O Surge Protector Cat6 outdoor IP66

Lieske Part No. 1928738
Mfg Part No ALL95102O
EAN-Code 4038816107046
Manufacturer Allnet
Here only 34,80 EUR
41,41 EUR incl. VAT

Further information for Allnet ALL95102O Surge Protector Cat6 outdoor IP66

General
Degree of protectionIP66
Network connection2x RJ45
Data rate10/100/1000 Mbps
PoE capabilityIEEE802.3af, at, LTPoE++ up to 90W
Leakage current capacity10kA (8/20µs), 100A (10/1000µs)
Ignition voltage90VDC ±20% (Pair to Earth)
Diff. Clamping<15V
Diff. capacitance<4.0pF
Protected conductors1 - 8 (on 8-pin module connector)
ESD protectionIEC 61000-4-2 class 4 (10kV CD)
Housing materialMetal
Operation temperature-40° ~ 80 °C
Ambient humidity during operation10% ~ 95% (non-condensing)
Test markIEEE 802.3, CAT 5, 6
MarkingCE, RoHS
Packaging contentsALLNET ALL95102O, user manual
The ALLNET ALL95102O is a surge protector for network cables, specifically designed for use in the outdoor environment. The device protects sensitive end devices such as IP cameras, WLAN access points, or LoRa gateways from damage caused by surges, particularly from lightning strikes. It is simply plugged between the network cable and the device to be protected and requires no configuration – installation is Plug and Play. The housing is IP66-certified, meaning it is dust- and waterproof, and thus functions reliably outdoors even in rain, splashing water, or dusty conditions. The metal housing provides additional mechanical protection and is suitable for use in industrial or safety-critical environments.

Applications include all devices operated via LAN connection outdoors. These include, for example, outdoor IP cameras, WiFi access points, LoRa or Helium miners, and other end devices connected via network cable. Protection is especially important when devices are installed in open or exposed areas, where they are more vulnerable to atmospheric discharges. In combination with a standard surge protector and equipotential bonding, the entire network infrastructure can be protected permanently.

Functions and equipment in detail include two RJ45 connectors for network connection, compatible with data rates of 10/100/1000 Mbps. The device supports PoE (Power over Ethernet) according to standards IEEE802.3af, at, and LTPoE++ up to 90 W, enabling PoE-compatible devices to be powered via the network cable without compromising protection. The surge current rating is 10 kA (8/20 µs) and 100 A (10/1000 µs), indicating high absorption capacity for electrical surges. The spark-over voltage is 90 VDC ±20 % (Pair to Earth), with clamping voltage below 15 V to protect sensitive devices. The differential capacitance is under 4.0 pF, which is very low and does not impair network signal quality.

Technology explained simply means that the surge protector diverts excessive voltage to protect the connected device. In the event of an extreme surge, the protector itself may be damaged and must be replaced. The ESD protection class 4 according to IEC 61000-4-2 (10 kV CD) provides protection against electrostatic discharges. The approval marks include IEEE 802.3, CAT 5 and CAT 6, confirming compatibility with common network standards. The operating temperature ranges from -40 °C to +80 °C, enabling use in extreme environments. Operating humidity is 10 % to 95 % (non-condensing), suitable for use in humid or dry environments.

Compatibility and accessories include use with PoE-compatible devices and network cables of categories 5 and 6. Suitable accessories available in the range include, for example, the PoE LED Spot Outdoor IR-Strahler 20W SECURITY LINE Poe 850nm or the unmanaged outdoor switch with 3 ports, Gigabit, 100W PoE+ and SFP port, IP67, fanless. These devices can be combined with the ALL95102O to create a complete, weatherproof, and surge-protected outdoor network solution.

Installation and mounting are tool-free and require no additional configuration. The device is simply integrated into the existing network connection – between the network cable and the device to be protected. The Plug-and-Play function enables quick and easy installation, even for users with limited technical knowledge. The dimensions are 200 mm (length) × 75 mm (width) × 45 mm (height), and the weight is 329 grams (device only). The packaging includes the device itself and an instruction manual.

Operational advantages include high reliability, easy installation, and weather resistance. The device continuously protects against surges without interrupting operation. The low differential capacitance ensures high signal quality, and PoE support enables power delivery via the network cable, eliminating the need for additional power lines. The IP66 protection rating makes the device suitable for outdoor use, even in rain, splashing water, or dust. The CE and RoHS marking confirm compliance with European safety and environmental standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1928738
qrcode für Allnet ALL95102O Surge Protector Cat6 outdoor IP66