Further information for Allnet All90600T UPS 600 VA Line-Interactive
General
Power in VA
600 VA
Power in watts
360 W
Input voltage
230 VAC
Input voltage range
162-290 VAC
Input frequency
50/60 Hz
Output voltage
220-240 VAC
Voltage tolerance
±10 %
Frequency tolerance
±1 Hz
Voltage waveform
modified sine wave
Battery
1x 12 V, 7 Ah
Charge time to 90%
4 h
Autonomy time at 25% load
22 min
Autonomy time at 50% load
8 min
Autonomy time at 75% load
1 min
Autonomy time at 100% load
0,5 min
Switching time
2-6 ms
Degree of protection
IP 20
Housing material
PVC
Colour housing
Black
Number of output sockets
4 x C13
Input
1x C14
Interface
USB Type B
Display
LCD with touchscreen
Operation temperature
0-40 °C
Air humidity
0-90 % (non-condensing)
Sound level (in operation)
silent
UPS classification
VI-SY-333 in accordance with IEC 62040-3
Software
Powershut Plus
Warranty
24 months
Over voltage protection
for telephone/modem RJ-11
Dimensions (H x W x D)
142 x 105 x 300 mm
Cold start function
AVR function
The Allnet All90600T is a Line-Interactive UPS (Uninterruptible Power Supply) with a rated power of 600 VA and an effective power of 360 W. It provides power supply and protection for office equipment such as PCs, printers, or network devices during short-term power outages or voltage fluctuations. The device features a PVC housing in black and is compactly dimensioned with dimensions of 142 mm (H) × 105 mm (W) × 300 mm (D), allowing it to be space-saving placed even in smaller workspaces. The UPS is fanless designed, ensuring silent operation and enabling use in office environments without noise disturbance.
Applications
The All90600T is suitable for use in offices, home offices, or small IT infrastructures where reliable power supply for sensitive electronics is required. It protects connected devices against voltage surges, under- and over-voltages, as well as short-term power outages. The integrated AVR function (Automatic Voltage Regulation) corrects voltage fluctuations in the network without discharging the battery, thus extending the lifespan of the accumulators. The UPS is designed for indoor operation, with a recommended operating temperature of 20 °C and an operating temperature range of 0 °C to 40 °C.
Functions and Equipment in Detail
The device features an LCD display with touchscreen, showing information such as input and output voltage, load, operating status, and battery capacity. Operation is performed via the touchscreen, making control intuitive and simple. The UPS provides four C13 appliance outlets as output, suitable for connecting PC, monitor, printer, or other IT devices. The input is via a C14 plug. Additionally, an overvoltage protection for telephone or modem connection is integrated via an RJ-11 connector to protect connected communication devices.
Technology Explained Simply
The All90600T operates using Line-Interactive technology, where the battery is only activated during a power outage. In normal operation, the load is supplied directly from the mains, while the AVR function corrects voltage fluctuations in the network. In the event of a power failure, the UPS switches to battery operation within 2 to 6 milliseconds to avoid interruption of connected devices. The output voltage is a modified sine wave, sufficient for most office devices. The battery consists of a sealed, maintenance-free lead-velvet accumulator with 12 V and 7 Ah capacity. The charging time is approximately 4 hours to reach 90 % of capacity. The UPS can also be charged in Off-Mode, i.e., even when the device is switched off.
Compatibility and Accessories
The UPS is equipped with a USB interface Type B, used for communication with the management software Powershut Plus. This software enables control and monitoring of the UPS via a computer and supports various operating systems, including Windows 7 to 10 (x86/x64) as well as various Linux distributions. As an accessory, an Effekta battery 12V-7AH, VdS-certified, is available, which can serve as a replacement or additional battery. The UPS is designed for use with a 230 VAC mains, with an input voltage range of 162 to 290 VAC and a frequency of 50/60 Hz (Auto-Sensing). The protection class is IP 20, meaning protection against contact with fingers and against solid foreign bodies, but not against water or dust.
Mounting and Installation
The All90600T is designed as a tower unit and can be placed on a desk or in a shelf. Installation is done by connecting the input plug to a socket and connecting devices to the C13 outlets. Software installation is performed via the included CD-ROM or by downloading the software. The UPS automatically detects the mains voltage and frequency and switches to battery operation within milliseconds in case of a power failure.
Advantages in Operation
The UPS provides reliable power supply for sensitive IT devices. The fanless design ensures silent operation, which is advantageous in office environments. The AVR function extends the battery lifespan, as voltage fluctuations are corrected without discharging the battery. The integrated software enables remote shutdown of connected devices to prevent data loss during power failure. The autonomy time is 22 minutes at 25 % load, 8 minutes at 50 % load, 1 minute at 75 % load, and 0.5 minutes at 100 % load. The UPS comes with a 24-month warranty.