| Technical data |
| Technology | LC fibre optic LWL |
| GBIC application site | Standard |
| Mode | Multimode SX |
| GBIC compatibility | uncoded |
| SFP | SFP |
| Distance | 550m |
| Speed Mini-GBIC | 1000Mbit |
The Allnet ALL4750 is an
SFP module (Small Form-factor Pluggable) for use in network switches and other Ethernet devices. It serves as an
optical transceiver for data transmission over
multimode fibre optic cable (Lichtwellenleiter) with a
data rate of 1000 Mbit/s. The module is specifically designed for use in
commercial environments, with an operating temperature range of 0 to +70 °C. It features an
LC connector and is designed for a maximum reach of
550 metres on 50/125 µm multimode fibre. The technology is based on an
850 nm VCSEL laser and a
PIN photodetector, enabling efficient and reliable data transmission. Power supply is via a
+3.3 V single voltage supply, which is typical for SFP modules. The electrical interfaces are
LVPECL-compatible, ensuring integration with standard network devices.
Applications
This module is designed for use in
Ethernet networks,
telecommunications systems, and
Fibre Channel systems. It is particularly suitable for applications requiring high data rates over fibre optic links, such as in corporate networks, data centres, or industrial networks. Compatibility with a wide range of manufacturers, including
Cisco, D-Link, Netgear, Ubiquiti, Zyxel, Mikrotik, TP-Link, QNAP, Synology, Planet, Watchguard, ZTE, Avaya, Avago, AlliedTelesyn, Cambium, CommScope Ruckus, Edgecore, Entersys, Lancom and Industry-Electronics, enables flexible use in existing infrastructures. The SFP module format (also known as Mini-GBIC) is standardized and used in many switch models, especially in devices with SFP slots.
Features and Specifications in Detail
The Allnet ALL4750 provides a
data rate of 1.25 Gbit/s, with the actual transmission rate at 1000 Mbit/s, complying with the Gigabit Ethernet standard. Optical characteristics include a
central wavelength of 850 nm, a
spectral width of up to 0.85 nm, and an
average output power between -8 and -3 dBm. The receiver sensitivity is
-19 dBm, enabling good signal transmission even at low power levels. The
extinction ratio is between 10 and 15 dB, ensuring clear signal transmission. The module includes
low-EMI and ESD protection functions, minimizing interference and electrostatic discharge. It complies with the
laser safety standard IEC-60825, ensuring safe operation. Additionally, the module is
RoHS-compliant, confirming the use of environmentally friendly materials.
Technology Explained Simply
The module operates as a
transceiver, meaning it functions as both transmitter and receiver. It converts electrical signals into optical signals (transmitter) and vice versa (receiver), enabling data transmission over fibre optic cables. The
LC connector is a standardized interface for fibre optic cables, ensuring a secure and precise connection.
Multimode technology allows simultaneous transmission of multiple light modes, enabling higher bandwidth over shorter distances (up to 550 m). The
850 nm wavelength is optimized for multimode fibre and offers a good balance between reach and signal quality. The
+3.3 V power supply is the standard voltage for SFP modules and is provided via the SFP slot in the switch. The
LVPECL interface ensures electrical compatibility with most network devices.
Compatibility and Accessories
The module is compatible with a wide range of switch models, particularly those supporting SFP slots. Compatible devices include, for example, Allnet switch models
ALL-SG8420M,
ALL-SG8428M,
ALL-SG8452M,
ALL-SG8610PMJ, and
ALL-SG8626PM, each featuring multiple SFP ports. These switches offer various port configurations (e.g., 16, 24, or 48 LAN ports) and are designed for different network environments. Compatibility with other manufacturers such as Cisco, D-Link, Ubiquiti, Zyxel, Mikrotik, TP-Link, QNAP, Synology, Planet, Watchguard, ZTE, Avaya, Avago, AlliedTelesyn, Cambium, CommScope Ruckus, Edgecore, Entersys, and Lancom enables flexible integration into existing networks. The SFP module format is universally applicable and used in many network devices.
Installation and Mounting
Installation of the Allnet ALL4750 is performed by simply inserting it into an SFP slot of a compatible switch. No tools are required, and the connection is automatically detected. Cabling is done using an
LC fibre optic cable with a diameter of 50/125 µm. The maximum reach is
550 metres, with signal quality still sufficient at this distance. The operating temperature range of 0 to +70 °C makes the module suitable for indoor use, particularly in server rooms, data centres, or office buildings. Power is supplied via the switch, so no additional power source is required. Installation is therefore quick and simple, without requiring additional configurations or software adjustments.
Operational Advantages
The module provides
reliable and stable data transmission over fibre optic links with a reach of up to 550 metres. The
high data rate of 1000 Mbit/s enables fast transmission of large data volumes, which is essential for modern networks.
Compatibility with many manufacturers increases flexibility in device selection and simplifies integration into existing infrastructures. The
low-EMI and ESD protection functions ensure robust and interference-free operation.
RoHS compliance guarantees environmentally friendly production. The
tool-free installation and automatic detection by the switch reduce installation time and costs. The module is therefore a
cost-effective and reliable solution for Gigabit Ethernet networks over fibre optic connections.