Allnet ALL4454_white, EAN: 4038816966896

Allnet ALL4454_white smoke detector gas sensor housing white

Security Technology > Sensors > Fire & Gas Detectors

Allnet ALL4454_white smoke detector gas sensor housing white

Lieske Part No. 838462
Mfg Part No ALL4454_white
EAN-Code 4038816966896
Manufacturer Allnet
Here only 87,25 EUR
103,83 EUR incl. VAT

Further information for Allnet ALL4454_white smoke detector gas sensor housing white

Technical data
Application sites MSRindoor
Compatibility with central unitALL4176
Construction typeMetal housing
Sensor typeSmoke & Gas
The Allnet ALL4454_white is a smoke and gas sensor in a flat, metallic housing made of aluminium, specifically designed for use in building technology and safety systems. The device is used for continuous monitoring of ambient air and detects both smoke and flammable gases such as methane, propane, and butane. The sensor technology is based on the Figaro TGS813, a MOS gas sensor made of tin dioxide (SnO2), which changes its resistance proportionally to the concentration of gases present. This enables simple, cost-efficient evaluation of the measured values. The sensor is intended for indoor use and operates in a temperature range of -45 °C to 90 °C at a humidity of 0 % to 100 % (non-condensing). The operating environment requires good ventilation to ensure reliable calibration and commissioning.

Applications

The ALL4454_white is designed for intelligent building automation systems, particularly in combination with Allnet MSR central units such as the ALL4176 or ALL5000v2. It is suitable for applications in residential and commercial buildings where early detection of smoke or gas leaks is necessary. Integration into networks via the I2C bus enables central control and monitoring over the internet, regardless of location or time. Application areas include both safety monitoring and energy saving through intelligent control of ventilation and heating systems.

Functions and Equipment in Detail

The device features a metal housing with an integrated bracket for wall mounting, allowing secure attachment to walls or tables. The front side displays two LED indicators: one for power supply (PWR) and one for bus status (BUS), visually indicating the operating status. The sensor is equipped with two RJ45 connectors, enabling connection to an I2C bus network. This configuration supports multiplexing, allowing multiple sensors to operate on a single physical port, provided the sensors have different I2C chip addresses and configurable IDs. The total cable length of 100 metres remains unchanged. The measured values are captured by an ADS1100A3 chip, which displays a measurement range of 0 to 100, with exact scaling defined within the system.

Technology Explained Simply

The sensor uses MOS sensor technology (Metal-Oxide-Semiconductor), in which the electrical resistance of the tin dioxide material changes upon contact with flammable gases. This change is electronically detected and converted into a digital signal, which is transmitted via the I2C bus to the central unit. The central unit can then trigger appropriate actions, such as alarms, ventilation systems, or emergency shutdowns. Calibration is performed by operating the sensor in clean air to determine a reference value, followed by testing with a test spray to determine the alarm threshold. This ensures precise and reliable threshold definition.

Compatibility and Accessories

The sensor is compatible with Allnet MSR central units from the series ALL34xx, ALL3500, ALL4500, and ALL5000, which feature an I2C bus. It is not compatible with models ALL3000 and ALL400x. An accessory cable is included in the delivery scope, enabling connection to the network. For integration into larger systems, combining the sensor with the MSR central unit ALL5000v2, which offers 16 sensor ports, is recommended. Using multiple sensors on the same port requires careful configuration of I2C addresses to avoid collisions.

Installation and Mounting

Mounting is done using the integrated bracket on the housing, which can be attached to walls or tables. Installation requires connection to an I2C bus network via the two RJ45 ports. Wiring is done using the included accessory cable. The central unit must be configured accordingly to receive and process sensor data. The calibration recommendation should be strictly followed to ensure reliable operation.

Operational Advantages

The ALL4454_white offers high sensitivity and long-term stability, making it suitable for continuous monitoring tasks. Simple integration into existing building automation systems and the possibility of multiplexing reduce installation costs and simplify network setup. The visual indication of operating status via LEDs facilitates maintenance and fault diagnosis. CE and RoHS markings confirm compliance with European safety and environmental standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/838462
qrcode für Allnet ALL4454_white smoke detector gas sensor housing white