Allnet ALL4429, EAN: 4038816006202

Allnet ALL4429 Air Pressure Humidity Temperature Sensor

Installation > Home Automation > Home Automation - Others

Allnet ALL4429 Air Pressure Humidity Temperature Sensor

Lieske Part No. 600256
Mfg Part No ALL4429
EAN-Code 4038816006202
Manufacturer Allnet
Here only 144,08 EUR
171,46 EUR incl. VAT

Further information for Allnet ALL4429 Air Pressure Humidity Temperature Sensor

Technical data
Application sites MSRindoor
Compatibility with central unitALL4176
Construction typeMetal housing
Sensor typeAir pressure
The ALL4429 is a combination sensor from Allnet for measuring air pressure, temperature, and humidity, specifically designed for use in home automation and building technology. The device features a flat, metallic housing made of aluminium, which can be used either as a desktop unit or as a wall-mounted unit. Wall mounting is enabled by integrated angle brackets, ensuring a secure and stable installation. The sensor is designed for indoor use and is suitable for intelligent control systems accessible via network and internet.

Applications

The ALL4429 is used in building automation systems where continuous monitoring of environmental parameters such as air pressure, temperature, and humidity is required. It is suitable for applications in residential and office buildings, where central control of heating, ventilation, and air conditioning is performed via network protocols. The measured values can be used for controlling ventilation systems, optimizing room climate, or monitoring environmental conditions.

Functions and Features in Detail

The sensor measures air pressure in the range of 0 to 1023 mbar, temperature from -40 to +80 °C with a resolution of 0.01 °C, and humidity from 0 to 100 % RH with a resolution of 0.5 %. The sensor technology is based on the BMP085 chip for air pressure and the SHT71 for temperature and humidity. The measured values are transmitted via an I2C bus, designed for multiplexing applications. This allows multiple sensors to be connected on a single line, reducing the number of required physical connections. The total cable length of 100 m remains unchanged.

Technology Explained Simply

The I2C bus (Inter-Integrated Circuit) is a serial communication standard that enables multiple devices to be connected via a common data and clock signal. When connecting multiple ALL4429 sensors, each sensor must have a unique I2C chip address and a configurable ID, so the central unit can uniquely identify each sensor. Sensors with the same chip address and configurable ID can be combined. For sensors without a configurable ID, only one sensor type per port is possible. Connections are made via two RJ45 connectors, which are not compatible with older ALL3000/ALL4000 systems.

Compatibility and Accessories

The ALL4429 is compatible with various MSR central units from Allnet, including models ALL3419, ALL3500, ALL5000v2, and ALL4176. These central units support ARM- and MIPS-based systems, enabling multiplexing operation. As accessories, various central units are available, offering different numbers of sensor ports and additional features such as WLAN or 48,3 cm ( 19 inch ) mounting. Connecting multiple sensors to a single port is only possible with systems using ARM- or MIPS processors.

Mounting and Installation

Installation is either on a flat surface as a desktop device or on a wall using the integrated angle brackets. The installation requires connecting the sensor via the two RJ45 connectors to the central unit or to a preceding sensor in the multiplexing network. The cable length between devices must not exceed 100 m. The operating environment requires a temperature range of -45 to 90 °C and humidity of 0 to 100 % (non-condensing). Storage conditions are -20 to 60 °C and 5 to 90 % humidity (non-condensing).

Advantages in Operation

The ALL4429 offers a compact, robust design with high measurement accuracy and minimal space requirement. The multiplexing capability reduces the number of required cables and connections, simplifying installation and making the system architecture more transparent. The use of aluminium as housing material ensures good heat dissipation and mechanical stability. Integrated LED indicators for power supply (PWR) and bus status (BUS) allow for quick visual inspection of the operating status. Certification according to CE and RoHS ensures compliance with European safety and environmental standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/600256
qrcode für Allnet ALL4429 Air Pressure Humidity Temperature Sensor