| General |
| Sensor type | Temperature |
| Measuring range | -40 to +85 °C |
| Resolution | 0,06 °C |
| Chip | LM92 |
| Connection | 2x RJ45 |
| Bus | I2C |
| Multiplexing | yes, with adjustment knob for ID |
| LED indicators | 1x PWR, 1x BUS |
| Housing | metal housing made of aluminium |
| Operation temperature | -45 to +90 °C |
| Operating humidity | 10 to 85 % (non-condensing) |
| Storage temperature | -20 to +60 °C |
| Storage humidity | 5 to 90 % (non-condensing) |
| Marking | CE, RoHS |
| Scope of delivery | 1x ALL4406 temperature sensor, 1x connection cable |
The ALL4406 temperature sensor from Allnet is a compact measuring device for detecting ambient temperature in buildings and technical installations. The device features a flat, robust housing made of aluminium, suitable for both desktop use and wall mounting. Wall mounting is enabled by integrated angle brackets, ensuring secure and stable installation. The sensor is specifically designed for integration into IP-based building automation systems, enabling central control and monitoring of temperature values via network and internet. Intelligent control of processes in building technology not only enhances comfort but also supports energy cost savings through targeted regulation and automation.
Temperature measurement with high accuracy
The sensor measures temperatures in the range of -40 to +85 °C with a resolution of 0.06 °C. This high measurement accuracy enables precise monitoring of room and ambient temperatures, which is particularly important in air conditioning systems, heating controls, or industrial processes. The LM92 chip used ensures reliable and stable measurement under various operating conditions. The measured values are transmitted via an I2C bus, used for communication with central control units such as the ALL3500v2 or ALL5000v2 central unit.
Multiplexing capability for flexible system expansion
A key feature of the ALL4406 is its support for multiplexing. Thanks to the two RJ45 connectors, the sensor can be connected in a chain with additional multiplexing modules, allowing multiple sensors to be operated on a single sensor port. The total cable length remains up to 100 metres. For unique identification of individual sensors in the network, an ID number adjustment dial is integrated, which can be configured via software. This allows combining multiple sensors with the same chip address, as long as the ID number is individually set. For sensors without adjustable ID, only one sensor type per port is permitted.
Technical equipment and operating conditions
The device features two LED indicators: one for power supply (PWR) and one for bus status (BUS), visually displaying the operating status. The metal housing offers high protection against mechanical impacts and is designed for indoor use. The operating temperature of the device ranges from -45 to +90 °C, with operating humidity between 10 % and 85 % (non-condensing). For storage, temperatures from -20 to +60 °C and humidity from 5 % to 90 % (non-condensing) are permitted. Dimensions are 79 x 50 x 24 mm (length x width x height), and weight is 230 grams (excluding packaging and accessories).
Compatibility and system integration
The ALL4406 is compatible with various Allnet central units, including the MSR central unit ALL3500v2 with 4 sensor ports and WLAN, the ALL3419 with 3 sensor ports, WLAN, and integrated temperature sensor, as well as the ALL5000v2 with 16 sensor ports for 48,3 cm ( 19 inch ) mounting. Integration occurs via the I2C bus, ensuring stable and reliable data transmission. The central units enable central control and visualisation of measured values via network and internet, allowing remote monitoring and control regardless of location and time.
Scope of delivery
The scope of delivery includes the ALL4406 temperature sensor and a connection cable. The packaging does not contain any additional components, such as batteries, tools, or documentation, unless explicitly mentioned.
Operation in the system
In operation, the sensor is connected to a central unit communicating via an I2C bus. The central unit collects the measured values and can use them for control tasks, such as adjusting heating output or controlling ventilation systems. The multiplexing capability allows flexible system expansion without requiring additional sensor ports. The LED indicators support troubleshooting and status overview during operation.
Certification and environmental standards
The device complies with CE and RoHS standards, confirming conformity with European safety and environmental requirements. Certification ensures safe and environmentally compatible use of the device in commercial and industrial applications.