| General |
| DIN rail width | 27 mm |
| Sensitivity setting | via potentiometer |
| Alarm storage time | 10 Seconds |
| Connection cable | 1 m |
| Compatibility | ALL3000/3418v2/3500/400x/4500/5000 |
The Allnet MSR sensor ALL4056 HUT is a
noise sensor for mounting on a
DIN rail with a width of 27 mm. It is used for acoustic monitoring in systems of
IP building automation and is employed in conjunction with central control units from the Allnet MSR series. The sensor detects loud noises via an integrated
condenser microphone, which is included in the delivery scope. The
sensitivity of the sensor, i.e. the threshold for triggering an alarm, can be manually adjusted using a
potentiometer to adapt the response to the respective environment.
Applications
The sensor is designed for use in buildings where acoustic alarm monitoring is required, for example in server rooms, warehouses, production facilities, or for monitoring machinery. It is suitable for detecting unusual noises such as breaking, impact, or loud machine noises that may indicate a fault. Integration is carried out into existing
IP building automation systems from the Allnet MSR family.
Functions and equipment in detail
The sensor registers acoustic signals via the included condenser microphone. When the set threshold is exceeded, an alarm is triggered. This alarm is stored in the system for
10 seconds and is then automatically cleared without requiring manual confirmation. The
adjustable sensitivity allows individual adaptation to different environmental conditions, such as in rooms with high background noise or in quiet areas. The device is designed for mounting on a DIN rail, enabling flexible installation in enclosures or control cabinets.
Technology explained simply
The condenser microphone captures sound waves and converts them into electrical signals. These signals are processed by the sensor, and when the set threshold is reached, a digital alarm signal is sent over the network to the central control unit. The use of a potentiometer for adjusting sensitivity provides a simple, hardware-based adjustment option without requiring additional software. The automatic clearing of the alarm after 10 seconds prevents the monitoring software from being continuously loaded by persistent notifications.
Compatibility and accessories
The sensor is compatible with Allnet MSR central units of the models
ALL3000,
ALL3418v2,
ALL3500,
ALL400x,
ALL4500, and
ALL5000. It can be integrated into existing IP monitoring systems that have corresponding sensor ports. As accessories, additional central units are available in the range, including the
ALL3419 with 3 sensor ports and WLAN, the
ALL3500v2 with 4 sensor ports and WLAN, and the
ALL5000v2 with 16 sensor ports and 48,3 cm ( 19 inch ) mounting. These central units enable management of multiple sensors and integration into larger building automation systems.
Mounting and installation
Mounting is carried out on a standard DIN rail (DIN rail) with a width of 27 mm. The device is intended for use in enclosures or control cabinets. The delivery scope includes a
1 m long connection cable that enables connection to the central control unit. Installation requires no additional tools or components; the connection is made via the designated connectors on the central unit.
Advantages in operation
The sensor provides a reliable, cost-effective way to detect acoustic disturbances in technical rooms. The simple mounting on the DIN rail and the manual adjustability of sensitivity facilitate integration into existing systems. The automatic alarm clearing after 10 seconds reduces the need for manual intervention and ensures clean event logging. Compatibility with a wide range of Allnet central units increases flexibility in system selection.