Allnet ALL3689, EAN: 4038816000330

Allnet ALL3689 Optical D0 Reader Head Standard

Installation > Home Automation > Home Automation - Others

Allnet ALL3689 Optical D0 Reader Head Standard

Lieske Part No. 474794
Mfg Part No ALL3689
EAN-Code 4038816000330
Manufacturer Allnet
Here only 24,85 EUR
29,57 EUR incl. VAT

Further information for Allnet ALL3689 Optical D0 Reader Head Standard

General
Product typeoptical D0 reader head
CompatibilityALL3691
Signal updateevery 2 seconds
Mountingindividual, e.g. with tape
The ALLNET Optical D0 Reader Head Standard (manufacturer's number ALL3689) is an accessory module for the MSR Powermeter Central Unit ALL3691. It is used to capture the D0 signal from modern electricity meters installed by energy suppliers. The D0 signal is typically transmitted automatically every two seconds in the infrared range by the meter. The sensor enables the transmission of this data to the central unit, allowing for digital measurement monitoring and evaluation within a building automation system.

Applications

The D0 reader head is specifically designed for integration into building automation systems where energy consumption is measured via modern electricity meters. It is used to capture consumption in real time and process it within a higher-level system, such as the ALL3691 central unit. The application is typically found in residential and commercial buildings where central energy monitoring is required.

Functions and Equipment in Detail

The sensor is optically designed and captures the D0 signal transmitted in the infrared range. Since the designs of D0 electricity meters vary, individual mounting of the sensor on the respective meter is required. This can be achieved, for example, using adhesive tape to ensure secure and stable positioning. Signal transmission is continuous, with data being updated every two seconds.

Technology Explained Simply

The D0 signal is a standard for data transmission from electricity meters, transmitted via infrared light. The sensor detects these light pulses and converts them into electrical signals, which are then forwarded to the ALL3691 central unit. The technology enables contactless and disturbance-free data acquisition without requiring mechanical connections or additional power supply. Infrared technology is particularly suitable here, as it does not require a physical connection to the meter, allowing for flexible installation.

Compatibility and Accessories

The D0 reader head is specifically developed for use with the ALLNET MSR Powermeter Central Unit ALL3691. It is part of a comprehensive building automation system that may also include other sensors such as S0 and induction modules. Compatible accessories also offered include the central unit ALL3696, which is equipped with an S0 sensor, a D0 sensor, and an induction module. This central unit is designed for IP-based building automation and enables integration into existing networks.

Mounting and Installation

Installation is performed directly on the electricity meter. Due to the varying designs of meters, the sensor must be positioned individually. Mounting can be done, for example, with adhesive tape to ensure a secure and lasting connection. It is important that the sensor can receive the infrared beam from the meter unobstructed, requiring a direct line of sight. Installation does not require special tools or additional power supply.

Operational Advantages

Using the D0 reader head enables precise and continuous energy consumption monitoring. Data is transmitted in real time to the central unit, allowing for quick analysis and response to consumption changes. Contactless data acquisition reduces the risk of interference or damage to the meter. Integration into existing building automation systems simplifies central control and monitoring of energy consumption.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/474794
qrcode für Allnet ALL3689 Optical D0 Reader Head Standard