Allnet ALL19022, EAN: 4038816190222

Allnet ALL19022 Yagi Antenna 2.4 GHz 14dBi

Networks > Wireless Networking > Antennas

Allnet ALL19022 Yagi Antenna 2.4 GHz 14dBi

Lieske Part No. 645706
Mfg Part No ALL19022
EAN-Code 4038816190222
Manufacturer Allnet
Here only 78,43 EUR
93,33 EUR incl. VAT

Further information for Allnet ALL19022 Yagi Antenna 2.4 GHz 14dBi

General
Frequency2.4 GHz
Gain14 dBi
Horizontal beam angle25 degree
Vertical beam angle30 degree
ConnectionN-type female connector
Mounting methodMast mounting
Wind load resistance216 km/h
Pivoting range+10° to -15°
Impedance50 Ohm
The Allnet ALL19022 is a 2.4 GHz Yagi directional antenna designed for use in the ISM frequency band, intended for wireless networks in outdoor environments. With a gain of 14 dBi and a radiation angle of 25° horizontal and 30° vertical, it provides targeted signal transmission over long distances. The antenna features an N-type female connector and is designed for mast mounting, with mechanical adjustability in height and depth, offering a tilt range of +10° to -15°. The impedance is 50 Ohm, enabling optimal matching with standard network devices. Designed for outdoor use, the antenna has a wind load resistance of 216 km/h, making it suitable for installations in exposed, windy areas. Dimensions are 560 mm length, 89 mm width, and 50 mm height, with a weight of 0.6 kg.

Applications
This antenna is suitable for use in wireless networks, particularly in industrial, agricultural, or infrastructure applications where targeted, long-range performance is required. It is commonly used in Point-to-Point or Point-to-Multipoint connections to stabilize WLAN links over long distances. The 2.4 GHz frequency is available in the ISM band and is used worldwide for WLAN, Bluetooth, and other wireless communication systems. The directional characteristic ensures that energy is focused in a specific direction, increasing signal strength in the target area and minimizing interference from other directions.

Features and Equipment in Detail
The antenna is equipped with an N-type female connector, enabling a secure and weatherproof connection to network devices. The mechanical adjustability in height and depth allows for precise alignment with the target repeater or access point. The wind load resistance of 216 km/h ensures stable mounting even in strong wind conditions. The dimensions of 560 x 89 x 50 mm and weight of 0.6 kg make the antenna compact and lightweight without compromising mechanical stability. The impedance of 50 Ohm is the standard value for most network devices, ensuring efficient energy transfer.

Technology Explained Simply
The Yagi technology is based on an array of multiple elements, where an active element (dipole) is surrounded by passive elements (reflector and director). This arrangement directs the radio signal in a specific direction, achieving a gain of 14 dBi. The radiation angle of 25° horizontal and 30° vertical describes the width of the radiation pattern — the narrower, the more focused the signal. The frequency of 2.4 GHz lies in the ISM band, which is allocated for wireless communication. The impedance of 50 Ohm ensures compatibility with standard network cables and devices, avoiding reflections or signal loss.

Compatibility and Accessories
The antenna is equipped with an N-type female connector, making it compatible with cables and connectors that also feature N-type connections. Suitable accessories include antenna cables LMR-195 in various lengths and with different connectors (e.g., R-SMA(m) to N-type(m)), as well as antenna T-pieces and splitters for signal distribution. These accessories enable flexible integration into existing network infrastructures. LMR-195 cable types are suitable for outdoor use and offer low attenuation, preserving signal quality over long distances.

Mounting and Installation
The antenna is designed for mast mounting and can be attached to a suitable mast or support. Mechanical adjustability allows for precise alignment with the target repeater. Installation requires a stable mounting to ensure the wind load resistance of 216 km/h. The connection is made via the N-type female connector, and a suitable cable (e.g., LMR-195) should be used to minimize signal loss. Installation should occur at a location with a clear line of sight to the target device to maximize range and signal quality.

Operational Advantages
The high directivity of the antenna ensures targeted signal transmission, increasing range and reducing interference. The wind load resistance of 216 km/h ensures stable installation even in exposed locations. The mechanical adjustability allows for easy and precise alignment. Compatibility with N-type connections and the use of LMR-195 cables ensure a reliable and durable connection. The antenna is designed for outdoor use and is suitable for permanent installations in industrial or infrastructure environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/645706
qrcode für Allnet ALL19022 Yagi Antenna 2.4 GHz 14dBi