| General |
| Frequency range | 2400 MHz |
| Gain | 7 dBi |
| Average profit | 5,5 dBi |
| Polarisation | Linear, vertical |
| Impedance | 50 Ohm |
| VSWR | 2,2 1 |
| Connection | R-SMA plug |
| Beam angle horizontal | 360 ° |
| Beam angle vertical | 20 ° |
| Operation temperature | -10 °C |
| Relative humidity | 95 % |
| Radome colour | Black |
| Maximum power | 2 W |
The Allnet ALL19005 is a
Wireless-LAN-omni-directional antenna for the 2.4 GHz frequency band, specifically designed for indoor use. With a
gain of 7 dBi, it offers significantly higher signal strength compared to standard antennas, which often have only about 2 dBi. The antenna features an
R-SMA connector (male), which can be directly screwed into access points with a matching female connector to enhance the range and signal quality of the WLAN network. Due to its
omni-directional radiation pattern, it transmits and receives signals evenly in all horizontal directions, making it particularly suitable for use in rooms with central positioning.
Applications
The antenna is designed for indoor environments where uniform WLAN signal coverage is required. It is suitable for offices, apartments, schools, or small commercial businesses where multiple end devices simultaneously require a stable connection. The
vertical polarization and
horizontal beamwidth of 360° ensure that the signal is radiated evenly in all directions, while the
vertical beamwidth of 20° limits the signal radiation upwards, reducing interference with other levels.
Functions and Equipment in Detail
The antenna operates in the frequency range of
2400 MHz to 2500 MHz, corresponding to the standard band for WLAN networks. The
gain of 7 dBi means the signal is amplified by 7 decibels compared to an isotropic reference antenna, resulting in significantly greater range and more stable connections. The
impedance is 50 Ohm, which is the standard impedance for WLAN and radio applications, ensuring optimal signal transmission. The
VSWR (Voltage Standing Wave Ratio) is maximum 2.2:1, indicating good matching to the cable system and minimizing losses due to reflections.
Technology Explained Simply
The antenna is equipped with an
R-SMA male connector, which is directly screwed into the female connector of an access point. This connector is widely used in WLAN applications and allows for easy installation without additional adapters. The housing is made of
ABS plastic, which is UV-resistant and thus does not degrade even with prolonged exposure to daylight. The
radome color is black, which blends well visually in most indoor environments. The
dimensions are 13 mm diameter and 280 mm length, making the antenna compact and easy to install. The
weight is 27.5 grams, enabling easy handling and installation.
Compatibility and Accessories
The antenna is compatible with all WLAN access points featuring an R-SMA female connector. For flexible installation, various
antenna cables with LMR-195 technology are available, equipped with R-SMA male and N-type female or R-SMA female connectors. These cables, available in lengths from 150 cm to 700 cm, allow flexible antenna placement, for example on walls or in ceiling areas. Additionally,
antenna T-pieces and
2-way splitters are available to operate multiple antennas from a single access point or to split signals.
Installation and Mounting
Mounting is done by directly screwing the R-SMA male connector into the corresponding female connector on the access point. No additional tools or adapters are required. The antenna can also be mounted remotely via cable, with the use of LMR-195 cables recommended to minimize signal loss. Installation typically requires no additional tools, as the connection is mechanically stable.
Operational Advantages
Thanks to the
higher gain of 7 dBi, the WLAN signal range is significantly extended, which is particularly beneficial in larger rooms or when multiple walls are present. The
omni-directional radiation ensures even signal distribution, reducing the likelihood of dead zones. Connection stability is improved by the low VSWR and 50-Ohm impedance. The
operating temperature range of -10 °C to +55 °C allows use in a wide range of indoor conditions, even with short-term temperature fluctuations.
Operating Temperature and Environmental Conditions
The antenna is designed for operating temperatures from
-10 °C to +55 °C, enabling use in typical indoor environments, including rooms with heating or air conditioning. The
relative humidity is up to 95 % at 55 °C, indicating high tolerance to humid environments such as office spaces or kitchen areas. The UV-resistant surface ensures that the antenna does not show material degradation even with prolonged exposure to daylight.
Performance and Signal Processing
The antenna can handle a
maximum power of 2 Watts (continuous), which is sufficient for most WLAN access points. The
average gain performance is 5.5 dBi, describing the efficiency of signal transmission under real-world conditions. The
co-polarization patterns in the H- and V-planes show even radiation in the horizontal direction and narrow vertical radiation, supporting targeted signal distribution in the room.
Materials and Design
The housing is made of
ABS plastic, a robust and durable material resistant to mechanical stress and environmental influences. The
black color of the radome ensures discreet integration into indoor spaces. The
compact design with a diameter of 13 mm and a length of 280 mm allows flexible placement, even in confined spaces or on walls.