ALLNET ALL048900V2 / Power over Ethernet injector AT ++ 90W
Highlights: Supports IEEE802.3, IEEE802.3u, IEEE802.ab, IEEE802.3af, IEEE802.3at and IEEE802.3at ++
1 Port 10/100/1000 Base-T (Data) for connection to a switch and
1 port 10/100/1000 Base-T (Power / Data) for connection to a PoE Gerät (PD)
Automatic recognition whether the connected Gerät PoE Capable With the 159ALLNET2415,5 cm ( 951 inch )High Power PoE injector ALL048900 install your PoE-enabled IP Endgeräte as WLAN access points, VoIP phones and more completely independent of existing Stromsteckdosen.So can be, for example, for WLAN access points Wireless technically most ideal installation locations in a Gebä ude Picker, without need to pay attention to the electrical wiring. Non-PoE switches can günstigst fähige be, with Power over Ethernet "nachgerüstet especially if you benötigt few ports with PoE supply. Here the ALL048900 spared the expensive purchase of a PoE switch. The ALLNET ALL048900 supports the IEEE802.3af standard with a power of 15.4 watts, the IEEE802.3at high power standard with 30 Watt and 90 Watt with IEEE802.3at ++ performance. The ALL048900 no need to configure. It has an RJ45 input connector and an RJ-45 output connector, this switch over and Endgerät be connected to the PoE injector. The Kabellänge can here, as in Ethernet customary, be up to 100 meters between the switch and Endgerät in total. The compact design and the Metallgehäuse can the ALLNET are very ALL048900 unauffällig installed and à ¤uÃ-only robust.
Technical specifications:
Element
Specification
Supported standards:
IEEE 802.3af Power over Ethernet
IEEE802.3at Power over Ethernet enhancements
IEEE802.3at ++ Power over Ethernet
IEEE802.3 10BaseT
IEEE802.3u 100BaseTX, IEEE802.ab 1000BaseT Ethernet ports: 1x RJ45 10/100 / 1000Mbps connection to the passive switch or hub 1x RJ45 10/100 / 1000Mbps for connecting to PoE-Endgerät LED indicators: Power / PoE Act / Status Power Input: 44 ~ 57V Power consumption: System: 5W (max.) LT PoE ++: up to 90W External Power Adapter: Input : 100 ~ 240VAC Output: 56VDC / 1.25A, 70W (max.) Housing: Metallgehäuse, wall mounting possible Maa-e: length / width / height: 155 x 74 x 36 mm Weight: 280g (o. PSU and packaging)
Surroundings:
Temperature Operation: 0 ~ 50 Â ° C
Operating Humidity: 10% ~ 90% (non-condensing)
Storage temperature: -40 ~ 70 Â ° C
Humidity Storage: 5% ~ 90% (non-condensing)
Labelling:
FCC Class A, CE Manufacturer Warranty:
36 months