ALLNET PoE injector Gigabit PoE IEEE802.3af Intelligent power supply via network without switch
With the ALLNET ALL0488V6 Power over Ethernet injector you can install your PoE-capable IP devices such as WLAN access points, VoIP telephones and much more completely independently of existing power sockets.
For example, the most ideal installation locations in a building can be selected for WLAN access points without having to pay attention to the power cabling.
Switches that are not PoE-capable can be retrofitted with Power over Ethernet at low cost, especially if you only need a few ports with PoE supply. Here the ALL0488V6 saves you having to purchase a PoE switch.
The ALLNET ALL0488V6 supports the IEEE802.3af Technical data: Element specification Supported standards: IEEE802.3at Power over Ethernet PoE+ IEEE802.3af Power over Ethernet IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE802.ab 1000BaseT Ethernet ports: 1x RJ45 10/100/ 1000 Mbps for connection to the switch or hub 1x RJ45 10/100/1000 for connection to the PoE end device
PoE output:
PoE IEEE802.11af/at, PoE midspan, power connections: 4.5(+) 7.8(-) power supply: 100 - 240VAC, internal power supply / output: 55V/550mA incl. connecting cable protective contact on IEC320-C5 Micky Mouse approx. 80cm length. Power consumption: 30 watts maximum with PoE device connected AC surge protection: 1.0KV (5P/5N) LN 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/ 20) Tr/Th us N -PE Housing: Plastic housing Installation: Wall mounting possible Dimensions: Length/Width/Height: 40 x 63 x 33 mm Environment: Temperature Operation: 0 ~ 40 °C
Humidity Operation: 10% ~ 90% (not condensing)
Storage temperature: -20 ~ 90 °C
Storage humidity: 5% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV( air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV Data Port: ±1kV IEC61000-4-5(Surge) Power Port: ±1kV/ DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz)
immunity.
IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marking: CE FCC Class A