Allnet ALL-SNB8142EKGrau, EAN: 4038816021144

Allnet ALL-SNB8142EKGrau 19" Rack 42HE light gray

19 Inch-Technology > Rack Cabinets > Racksystems 31+HE

Allnet ALL-SNB8142EKGrau 19" Rack 42HE light gray

Lieske Part No. 277930
Mfg Part No ALL-SNB8142EKGrau
EAN-Code 4038816021144
Manufacturer Allnet
Here only 1.111,97 EUR
1.323,24 EUR incl. VAT

Further information for Allnet ALL-SNB8142EKGrau 19" Rack 42HE light gray

Technical data
19/10"/DIN-rail19"
ColoursLight grey
Height units42 HE
Cabinet typeFloor-standing cabinet
Depth1000 mm
Width800 mm
Height2000 mm
Door typePerforated door
The Allnet server rack ALL-SNB8142EKGrau is a 48,3 cm ( 19 inch ) server and network rack with a height of 42 rack units (U), designed for use in IT infrastructures, data centres or office and industrial facilities. It features a width of 800 mm, a depth of 1000 mm and a total height of 2000 mm. The colour is light grey, corresponding to RAL7035, providing a neutral and professional appearance. The rack is pre-assembled but fully disassemblable, enhancing transport and installation convenience. It is designed for a maximum load capacity of 500 kg, thus offering sufficient stability for use with heavy IT and network equipment.

Applications
This rack is suitable for use in IT and network environments where structured and secure housing of servers, switches, routers, UPS systems and other 48,3 cm ( 19 inch ) devices is required. The perforated doors ensure efficient air circulation, which is particularly important at high device density. The integrated fans with thermostat automatically control cooling to ensure optimal operating temperature. Cable routing channels and the cable routing plate enable orderly and clear cabling, facilitating maintenance and expansion.

Functions and Equipment in Detail
The rack features a perforated sheet metal front door (1-piece) and a perforated sheet metal rear door (2-piece), both with integrated locks. The doors are reversible, allowing them to be mounted on the left or right, increasing flexibility during installation. The side panels are removable and also equipped with locks. The usable depth is 850 mm, allowing even deeper devices to be accommodated easily. The front and rear 48,3 cm ( 19 inch ) mounting profiles are marked with rack unit divisions, enabling precise device placement. An intermediate shelf and a pair of L-brackets (T750/B40/H40 mm) are already installed, supporting the use of devices with different mounting heights.

Technology Explained Simply
Cable routing is achieved via two vertical cable routing channels on the front (right and left), which are hinged, and a cable routing plate with cover. Cable entries are equipped with brush strips at the top (front and rear) and bottom (front, centre, rear) to ensure secure and dust-free cabling. Earthing is done via an earthing bolt M6, with doors connected via earthing cables to ensure a safe electrical connection. The adjustable feet (height 20–70 mm) allow for level positioning even on uneven floors. The castor set (2x with brake, 2x without brake) facilitates transport and positioning of the rack.

Compatibility and Accessories
The rack is compatible with a wide range of accessories suitable for extending and optimising the installation. These include, for example, power strips, patch panels, PDU systems, circuit breaker strips, cable routing shafts, shelf dividers, cable ties and cable clamps. These components can be added as required to adapt the rack’s functionality to the specific needs of the application. Installation is done via the 48,3 cm ( 19 inch ) mounting profiles, which are present both at the front and rear.

Assembly and Installation
The rack is pre-assembled but fully disassemblable, simplifying on-site assembly. The 48,3 cm ( 19 inch ) profile spacing at front and rear is 800 mm and adjustable in 20 mm increments up to 880 mm, allowing adaptation to different device configurations. Assembly is done via designated mounting points, and the delivery includes all necessary mounting accessories such as cage nuts and screws. Installation does not require special tools, as doors and side panels can be snapped into place without tools.

Operational Advantages
The rack offers high flexibility thanks to adjustable feet, reversible doors and adjustable 48,3 cm ( 19 inch ) profile spacing. The perforated doors and integrated fans ensure efficient cooling, increasing the operational reliability of installed devices. Structured cable routing and integrated brush strips minimise the risk of dust and moisture ingress, extending device lifespan. The maximum load capacity of 500 kg and robust construction ensure safe and durable use. The rack is delivered without a plinth, which must be considered during installation. The IP20 protection rating is suitable for indoor use where no direct exposure to water or dust is expected.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/277930
qrcode für Allnet ALL-SNB8142EKGrau 19" Rack 42HE light gray