| Technical data |
| Management | unmanaged |
| PoE budget | <50 Watt |
| Number of PoE/LAN ports | 2/2 |
| Switch application site | Desktop |
| Ventilation switch | With fan |
| LAN speed | 1Gbit/s |
| PoE port power | 15,4W af |
| Extra features | 1x PoE In |
The ALL-SG8205PD is an unmanaged 5-port Gigabit Ethernet switch from Allnet, specifically designed for integration into PoE networks. The device features two PoE outputs (PSE ports) and one PoE input (PD port), enabling it to both receive power via the network cable and supply power to end devices. The PoE technology is based on IEEE 802.3af and IEEE 802.3at standards, with the outputs supporting the 802.3af specification (up to 15.4W per port). The switch is designed for desktop use and features a metal housing that ensures efficient heat dissipation. Power supply can be achieved either via the PD port using an external PoE source device (e.g. PoE injector or PoE switch) or via the included power supply unit, with PoE budgets varying depending on the power supply method.
Applications
The ALL-SG8205PD is particularly suitable for connecting PoE-enabled end devices such as IP cameras, WLAN access points, or VoIP phones. The combination of data and power transmission over a single network cable reduces the need for additional power outlets and simplifies installation, especially in areas where no sockets are available. The maximum cable length is 100 meters from the PoE source device to the switch and an additional 100 meters from the switch to the end device, allowing for flexible placement. Use in small network segments or for micro-segmentation of larger networks is also possible, helping to optimize bandwidth for demanding applications such as multimedia or graphic editing.
Functions and Features in Detail
The switch provides five RJ45 ports with 10/100/1000BaseT(X) support, where two ports serve as PSE (Power Sourcing Equipment) for powering end devices and one port functions as PD (Powered Device) for its own power supply. The remaining two ports are standard LAN ports. Data transmission occurs in Store-and-Forward mode, ensuring reliable packet transfer. The address table contains 4000 entries, managed through self-learning. LED indicators on the front panel display operational status (Power, Uplink, PD) as well as link and activity status for individual ports. The PoE outputs are equipped with overcurrent and short-circuit protection to enhance network safety.
Technology Explained Simply
The PoE technology (Power over Ethernet) enables simultaneous transmission of data and power over a single Ethernet cable. The ALL-SG8205PD uses the PD port to draw power from an external PoE source device (e.g. a PoE injector or another PoE switch). At the same time, it can supply power to compatible end devices via the two PSE ports. The maximum power per PSE port is 15.4W (802.3af), sufficient to operate typical IP cameras or WLAN access points.
Compatibility and Accessories
The switch is compatible with network standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x Flow Control. PoE support is provided according to IEEE 802.3af and IEEE 802.3at. Available accessories include various patch cables (e.g. CAT5e, CAT6, FTP, S-STP) and PoE injectors (e.g. ALL0489v4), which facilitate integration into existing networks. Combining the switch with a PoE injector allows power supply over the network cable, eliminating dependence on power sockets. The use of CAT5e or higher cables is recommended to ensure full Gigabit speed and PoE functionality.
Mounting and Installation
The ALL-SG8205PD is designed as a desktop device and can be placed on a flat surface without additional mounting aids. Installation is plug-and-play, requiring no software configuration. Power supply can be achieved via the PD port, with a maximum cable length of 100 meters. Alternatively, the included power supply unit can be used. The LED indicators facilitate diagnosis and status monitoring during installation. Cascading via the uplink port is possible, but only when operating with an external power supply.
Advantages in Operation
Operating the ALL-SG8205PD is simple and low-maintenance. The unmanaged architecture requires no configuration, making it ideal for small networks or as an extension in existing infrastructures. The combination of PoE input and output enables flexible, cable-reduced installation. Power supply via the network cable reduces the number of required power outlets and simplifies placement of end devices. Integrated protection functions (overcurrent and short-circuit protection) enhance network safety. The operating temperature ranges from 0 to 50 °C, with humidity from 10 % to 90 % (non-condensing), ensuring indoor use. The device features a fan to support cooling, ensuring continuous operational reliability under higher load conditions.