| Technical data |
| PoE port power | 30W at |
| Ventilation switch | Fanless |
| LAN speed | 1Gbit/s |
| SFP speed | SFP 1GBit |
| Switch application site | 19" |
| SFP port count | 2 |
| Management | unmanaged |
| PoE budget | <300 Watt |
| Number of PoE/LAN ports | 16/0 |
The ALLNET unmanaged Layer2 18-port switch (model ALL-SG8018P) is an
unmanaged network switch designed for use in
48,3 cm ( 19 inch )-racks, specifically intended for small to medium-sized networks. It features 16
PoE+ (Power over Ethernet Plus) ports, each delivering up to
30W of power, and two
SFP (Small Form-factor Pluggable) ports for fiber or copper uplinks. The device is
fanless, enabling silent operation and making it suitable for environments where noise must be avoided, such as offices, schools, or medical facilities.
Applications
This switch is suitable for use in small networks requiring a simple, reliable, and low-maintenance network connection. The
PoE+ function enables power delivery to end devices such as IP cameras, wireless access points, or VoIP phones directly via the Ethernet cable, eliminating the need for additional power supplies. The
16 PoE ports provide sufficient connections for typical surveillance or communication applications. The two
SFP ports allow integration of fiber connections, extending the network’s reach and bandwidth. The
48,3 cm ( 19 inch ) form factor enables standard mounting in server or network racks.
Functions and Features in Detail
All 16 RJ45 ports support
10/100/1000Mbps (Gigabit Ethernet) and are equipped with
Auto MDI/MDI-X, enabling automatic detection and adaptation of the connection (crossover or straight-through).
PoE+ support complies with
IEEE802.3at and
IEEE802.3af standards, with power delivery via
Alternative A (pins 1,2/3,6). Maximum PoE power per port is
30W, and the total PoE budget of the switch is
240W. Power supply is provided by an internal power unit with an input range of
100–240V AC. LED indicators on the device show operational status (Power, PoE, Link/ACT), enabling quick visual inspection of connections.
Technology Explained Simply
The switch operates in
Store-and-Forward mode, where data packets are fully received, checked, and then forwarded, ensuring high data integrity. The
switching capacity is 36 Gbps in both directions, sufficient to support all 16 ports simultaneously at Gigabit speed. The
MAC address table contains 8K entries, adequate for most local networks. Support for
Jumbo Frames up to 10K bytes enables more efficient data transfer, especially for large files or streaming applications, as fewer packets need to be transmitted. The
packet buffer size of 4.1 Mbit ensures stable data processing under high loads.
Compatibility and Accessories
The two SFP ports are compatible with various SFP modules, such as
SFP modules for copper (RJ45) or
fiber (singlemode/multimode). Compatible modules include, for example, the
ALL4765 SFP (Mini-GBIC), 1000 Mbit, RJ45 (TP) or the
ALL4750 SFP (Mini-GBIC), 1000 Mbit, SX/LC, Multimode. These modules extend network connectivity over longer distances or within fiber infrastructures. For copper cable connections,
CAT6A surge protection devices such as the
ALL95101 or
ALL95100 can also be used to enhance network security.
Mounting and Installation
The switch is designed for mounting in a
48,3 cm ( 19 inch ) rack and includes the necessary mounting holes. The fanless design requires no additional ventilation, although the ambient temperature during operation should be between
0 °C and 40 °C. Maximum operating humidity is
90 % RH (non-condensing). Installation involves simply mounting the unit in the rack and connecting network cables to the RJ45 ports. Power supply is provided by the integrated power unit.
Operational Advantages
The fanless operation ensures
complete silence, making the switch particularly suitable for sensitive environments. The
PoE+ function reduces the number of required power cables and simplifies the installation of network devices. The
automatic detection of PoE devices (PD) and immediate power delivery upon connection increase efficiency.
Support for Jumbo Frames improves data transfer rates for large data volumes. The
power supply via the power unit (100–240V AC) makes the switch independent of specific voltage standards and globally usable.