| Technical data |
| Colours | Black |
| 19" rack accessories | Brush strip |
The brush strip from Allnet, manufacturer number ALL-S0002005, is a specially developed accessory for 48,3 cm ( 19 inch ) wall-mounted enclosures of the SMB and SMC series. It serves as a cable guidance element at the upper or lower cable entry of the enclosure and enables an orderly and damage-free routing of cables. The strip is black, corresponding to the colour RAL9005, and thus matches the existing product line both visually and functionally. Its dimensions are 359 mm in width and 56 mm in depth, ensuring a compact yet effective placement within the enclosure.
Applications
The brush strip is primarily designed for use in IT infrastructures, particularly in server and network environments where structured cable routing is required. It is mounted at the cable entries of the 48,3 cm ( 19 inch ) wall-mounted enclosures to protect cables during entry and exit, while also ensuring orderly routing. This is especially important to prevent mechanical damage to cables caused by friction or pressure, which extends the service life of the cabling and increases the reliability of the system.
Functions and Features in Detail
The brush strip consists of a series of elastic bristles integrated into a stable housing. These bristles are designed to allow cables to pass through gently without causing damage, while simultaneously preventing dust or foreign objects from entering the enclosure. The construction ensures secure and durable mounting at the designated entries of the SMB and SMC series. The black colour (similar to RAL9005) contributes to a uniform visual appearance in the server room.
Technology Explained Simply
The brush strip operates on the principle of flexible yet stable cable guidance. The bristles are made of an elastic material that deforms easily when cables pass through and then returns to its original position. This prevents cables from being torn or damaged by friction. The strip is dimensioned to fully cover the cable entry of the enclosure, thus also providing some protection against dust and small particles. Installation is direct to the enclosure without additional fastening elements, enabling quick and easy mounting.
Compatibility and Accessories
The brush strip is specifically developed for the 48,3 cm ( 19 inch ) wall-mounted enclosures of the SMB and SMC series from Allnet. It is not intended for other enclosure designs or manufacturers. As a complementary accessory, a 100-piece pack of cable ties with marking surface (article number S215696) is available in the range. These cable ties are transparent and have a length of 100 mm and a width of 2.5 mm, suitable for additional securing and labelling of cables.
Installation and Mounting
The brush strip is mounted directly at the cable entry of the 48,3 cm ( 19 inch ) wall-mounted enclosure. It is inserted into the designated cutouts and fits securely by form-fit. No additional fastening elements or tools are required. Installation is therefore quick and can be performed without special prior knowledge. The strip can be mounted at either the upper or lower entry, depending on the cable routing requirements.
Operational Advantages
Using the brush strip improves cable organisation, simplifying maintenance and fault diagnosis in the network. The protective function of the bristles extends the service life of the cables, increasing operational reliability. The uniform black colouring ensures a professional and tidy appearance in the server room. The simple installation and compatibility with the SMB and SMC series make the strip a practical accessory for professional IT installations.