| Technical data |
| Colours | Light grey |
| 19" rack accessories | Fan unit wall housing for SMB/SMC/SMH series |
The fan unit from Allnet, type ALL-S0002000, is an accessory module for 48,3 cm ( 19 inch ) wall-mounted enclosures of the SMB-, SMC-, SMA- and SMH-series. It is designed for targeted ventilation and cooling inside the enclosure to regulate the operating temperature of installed devices. The unit is finished in light grey, similar to RAL7035, and is mounted internally on the ceiling of the enclosure, ensuring efficient air circulation from top to bottom. The construction from SPCC (steel sheet) ensures robust and long-lasting use in server and network environments.
Applications
The fan unit is specifically designed for use in 48,3 cm ( 19 inch ) wall-mounted enclosures used in IT infrastructures, such as data centres, server rooms or small network centres. It supports cooling of devices that generate heat under heavy load, thus preventing overheating. Mounting on the ceiling of the enclosure enables optimal airflow, as warm air rises and is extracted by the fans.
Functions and equipment in detail
The unit features two fans that together provide sufficient airflow capacity. The fans are equipped with a thermostat that monitors operating temperature and automatically activates the fans when a preset temperature is reached. This ensures energy-efficient operation, as the fans run only when needed. An integrated power switch also allows manual control. The device is connected to the mains via a 1.7 m power cable with a grounding plug. The fan noise level is approximately 45 dB, suitable for quiet operation in office environments.
Technology explained simply
The fan unit operates at 220 V with a current consumption of 0.28 A. Power supply is via the included cable, which is connected directly to a socket. The thermostat control reacts to the ambient temperature inside the enclosure and turns the fans on or off depending on whether the preset temperature is exceeded. Installation is on the ceiling of the enclosure, with screw hole spacing within the enclosure at W325 mm and D105 mm. The external dimensions of the unit are W346 mm, D133 mm and H41 mm.
Compatibility and accessories
The fan unit is specifically developed for Allnet 48,3 cm ( 19 inch ) wall-mounted enclosures of the SMB-, SMC-, SMA- and SMH-series. As accessories, replacement temperature sensors are available, allowing temperature settings between 0 and +60 °C. Replacement fans with dimensions W120 mm, L120 mm, D38 mm can also be purchased to replace the fans in case of wear or failure. Cable ties with marking surface (L100 x W2.5 mm) are also available in the range to neatly arrange cables inside the enclosure.
Installation and mounting
Mounting takes place inside the wall-mounted enclosure on the ceiling. The unit is secured using screws at the designated mounting points, taking into account the screw hole spacing of W325 mm and D105 mm within the enclosure. After mounting, the power cable is connected to a suitable socket. Installation requires no special tools or additional components.
Advantages in operation
The fan unit ensures consistent cooling performance through its automatic temperature control, eliminating the need for constant manual intervention. The low noise emission of approximately 45 dB allows use in offices or other sensitive environments. The use of SPCC material ensures high mechanical stability and durability. Compatibility with the SMB/SMC/SMH-series from Allnet makes it a standard accessory for this enclosure family.