ALLNET 4duino 3D printer e.g. Heating element cable 24V
Size: 0.6x2cm, cable length 1m
Voltage: 24V
Power: 40W
Material: stainless steel (304)
3D printer 6*20 mold Cartridge Heater/heating tube/single-ended heating rod 24V 40W
Features: rapid temperature increase, working temperature: 450 °
Instructions for use: 1. The effective heating part of the heating pipe must be kept dry.
2 the electrical connector of the single-sided heating pipe should be outside the insulation layer and the heating chamber, and the working voltage should not exceed 10% of its rated value, the outer shell should be effectively connected to the ground.
3 Working environment of the electric heating element: the relative temperature should not be more than 95% and there should be no explosive, corrosive gas in the environment.
4 Electric heating element should be stored dry and free from moisture. \dlashMaterial: stainless steel (304)
Features: fast temperature elevation, working temperature: 450°
Usage: plastic molding mold, C02 pressure reduction assembly, cigarette machine, quick sealing machine, pharmaceutical machinery and etc..
Instructions for use:1. The effective heating part of the heating pipe must be kept dry.
2 the electrical connector of the single ended heating pipe should be placed outside the insulation layer and the heating chamber, and the working voltage should not exceed 10% of its rated value, the outer shell should be connected to the ground effectively.
3 working environment of electric heating element: the relative temperature should be no more than 95% and there should be no explosive, corrosive gas.
4 electric heating element should be stored in the dry place free from moisture."