Allnet ALL-GHN102-Coax-Set, EAN: 4038816049070

Allnet ALL-GHN102-Coax-Set G.HN Bridge Converter Bundle

Networks > VDSL

Allnet ALL-GHN102-Coax-Set G.HN Bridge Converter Bundle

Lieske Part No. 156767
Mfg Part No ALL-GHN102-Coax-Set
EAN-Code 4038816049070
Manufacturer Allnet
Here only 220,90 EUR
262,87 EUR incl. VAT

Further information for Allnet ALL-GHN102-Coax-Set G.HN Bridge Converter Bundle

General
Network standardITU G.9960 G.hn over Coax
Ethernet interfaceTwo RJ-45 connectors
Ethernet speed100/1000 Mbps
G.hn data rateapprox. 890 MBit/s net
G.hn frequency range2 MHz - 200 MHz
G.hn coaxial connectorsTwo
LED indicatorsPower, G.hn Link/Activity/Quality, Ethernet Link/“Activity x2
QoSPriority assignment based on IEEE 802.1p
VLAN supportTag/UnTag or Pass Through
ManagementGUI, Web Browser, TR-069 (optional)
Current supply12 V
Power consumption4 W
Operation temperature0 °C
Storage temperature-10 °C
Air humidity10 %
MountingWall mounting possible
Identification markCE
TV bypassYes
Integrated filterYes
IGMP SnoopingYes
IPv4/IPv6Yes
Power supplies includedYes
The Allnet ALL-GHN102-Coax-Set is a point-to-point G.hn bridge converter designed to extend a private network over existing coaxial cables in residential buildings. It enables the use of existing TV cabling as a backbone for a home network, eliminating the need for additional network cable installation. The devices are suitable for wall mounting and utilize coaxial cabling in the frequency range of 2 MHz to 200 MHz to transmit data over the existing cable network. The technology is based on the ITU G.9960 G.hn standard, which enables high data rates over coaxial cables.

Applications
This device is designed for use in residential houses and apartments where coaxial cabling for television and satellite reception is already in place. It serves as a network bridge between Ethernet end devices such as PCs, set-top boxes, DSL modems, or FTTH end devices and the existing coaxial network. The solution is particularly suitable for environments where re-cabling with Ethernet cables is not desirable or technically impossible. The maximum number of connectable devices is eight, with the G.hn connection serving as the backbone.

Functions and Features in Detail
The set includes two devices, each featuring two RJ-45 Ethernet ports compatible with 100/1000 Mbps Gigabit Ethernet. These interfaces support Auto-Negotiation and MDI/MDI-X Auto-Crossover, ensuring compatibility with various network devices. The G.hn interface uses two coaxial connectors, one for G.hn data transmission and the other for TV bypass. An integrated filter prevents interference into the TV network, minimizing disruptions. Signal quality is visually indicated via an LED display for G.hn (Link/Activity/Quality) and two LED displays for the Ethernet interfaces (Link/Activity).

Technology Explained Simply
The G.hn technology uses existing coaxial cable as a data transmission medium in the frequency range of 2 MHz to 200 MHz. The maximum net data rate is approximately 890 MBit/s over 100 m of coaxial cable. The PHY-measured rate corresponds to the Gigabit Ethernet interface. The devices support Energy Efficiency Ethernet (IEEE 802.3az), reducing power consumption. Power supply is via 12 V, with a power consumption of 4 W. The devices are designed for operation at temperatures from 0 °C to 50 °C and relative humidity from 10 % to 95 % (non-condensing). Storage temperature ranges from –10 °C to 65 °C.

Compatibility and Accessories
The devices are compatible with the standards ITU G.9960 G.hn over Coax, IEEE 802.3u (100M Fast Ethernet), IEEE 802.3ab (1000M Gigabit Ethernet), and IEEE 802.3az (Energy Efficiency Ethernet). They support IPv4 and IPv6, QoS with priority assignment based on IEEE 802.1p, VLAN support (Tag/UnTag or Pass Through), and IGMP Snooping. Configuration is performed via a web GUI or optionally via TR-069. The devices are designed for use with FTTH, DSL modems, and other Ethernet terminals.

Mounting and Installation
The devices are designed for wall mounting and can be installed at suitable locations within the building. Installation involves connecting the coaxial cables to the corresponding sockets and Ethernet devices to the RJ-45 ports. Power supply is provided via the included power adapters. The devices are intended for indoor use and require no special mounting tools.

Operational Advantages
Utilizing existing coaxial cabling reduces installation costs and time, as no new cables need to be laid. The G.hn technology offers high data rates and is suitable for use in residential buildings. The integrated signal quality indicator enables easy monitoring of network status. Support for QoS and VLAN allows targeted network control. Energy efficiency reduces power consumption during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/156767
qrcode für Allnet ALL-GHN102-Coax-Set G.HN Bridge Converter Bundle