| General |
| Modem type | Point-to-Point Modem Set |
| Components | ALL-BM310 (Master) and ALL-BM300 (Slave) |
| Technology | G.Fast |
| Maximum cable length | 500 m |
| Maximum bandwidth | 1,5 Gbps |
| G.Fast profiles | 212a |
| Network connections | 4x RJ-45 10/100/1000Mbps |
| Line connection | 1x RJ-11 for G.Fast |
| Terminal block | 1x RJ-11 |
| Safety functions | SSH/SSL |
| Power adaptor | included in delivery scope |
The ALLNET ALL-BM320 is a point-to-point modem set for transmission over existing 2-wire copper lines, consisting of the master modem ALL-BM310 and the slave modem ALL-BM300. It is designed for establishing dedicated lines with a maximum length of 500 meters. The technology is based on the
G.Fast standard, enabling high data transfer rates. The maximum bandwidth reaches up to 1 gigabit per second, with the actual speed depending on the length and quality of the copper line. At short distances of approximately 200 meters, bandwidths of up to 1.5 gigabits per second are possible. Transmission occurs via the
G.fast 212a profile, optimized for high data rates over short to medium distances. The devices are specifically designed for demanding retrofits in existing IT infrastructures, where cost-effective and minimal installation of network applications with high data rates is required. Another application area includes buildings without existing LAN cabling, where new cabling is not feasible due to the building structure. The devices are suitable for use in industrial and commercial environments, where a stable and reliable data connection over existing copper lines is needed.
Applications
This modem set is suitable for connecting networks over existing copper lines in buildings, factories, office complexes, or other facilities where new cabling is not economically or technically feasible. It is particularly used in scenarios requiring a fast and cost-efficient alternative for network expansion, without the need to install new copper or fiber-optic infrastructure. The technology enables the use of existing telephone lines or other 2-wire connections for data transmission, allowing quick installation with minimal construction work.
Functions and Equipment in Detail
The set includes two devices: the ALL-BM310 as the master modem and the ALL-BM300 as the slave modem. Both devices are designed for use in a point-to-point network. The master modem features four RJ-45 ports for 10/100/1000Mbps network connections, which can be used to connect to local networks. An RJ-11 port serves as the G.Fast connection to the slave modem. Additionally, an integrated RJ-11 terminal block provides flexible connection options to existing copper lines. The device includes an integrated splitter for analog telephony, allowing the line to be used simultaneously for data transmission and telephony. Data transmission security is ensured by support for SSH and SSL, enabling encrypted communication.
Technology Explained Simply
The G.Fast technology uses existing copper lines to transmit data at high speeds. Unlike older DSL technologies, which are often limited over longer distances, G.Fast enables higher data rates over short to medium distances. The maximum bandwidth of 1.5 Gbps (combined upstream/downstream) is achieved over short connections, with speed decreasing as line length increases. The connection between master and slave modem is established via a simple 2-wire copper line, which may, for example, be an old telephone line. The devices are designed to automatically adapt to line quality and utilize the maximum possible speed. Power supply is provided by a power adapter included in the delivery scope.
Compatibility and Accessories
The modem set is specifically designed for use with the ALLNET ALL-BM300 (slave) and the ALLNET ALL-BM310 (master). The devices are compatible with the G.Fast standard and support the 212a profile. As an accessory, a replacement power adapter with 12V/2.5A and KEFA connector (Phoenix® compatible) is available, suitable for the BM300 and BM310 devices. This can be used as a replacement or for redundant power supply if required.
Installation and Mounting
Installation is performed by connecting the two modules to the existing 2-wire copper line. The master modem is connected at one end of the line, the slave modem at the other. The network ports on the master modem are connected to the local network. Power supply is provided via the power adapter included in the delivery scope. The devices are designed for simple wall or enclosure mounting. Connection options via RJ-11 and terminal block allow flexible integration into existing installations.
Operational Advantages
Using the ALLNET ALL-BM320 offers the advantage of utilizing existing copper lines without additional installations. This significantly reduces installation costs and construction time. The high data rate enables bandwidths sufficient for modern network applications such as video surveillance, cloud connections, or large data transfers. Integrated security via SSH/SSL protects data transmission from unauthorized access. The devices are designed for use in industrial and commercial environments, where a reliable and stable connection is required. Power supply via the included power adapter ensures easy commissioning.