Allnet ALL-BM300, EAN: 4038816090690

Allnet ALL-BM300 ISP Bridge Modem g.fast Supervectoring

Networks > Modem > Miscellaneous

Allnet ALL-BM300 ISP Bridge Modem g.fast Supervectoring

Lieske Part No. 1776880
Mfg Part No ALL-BM300
EAN-Code 4038816090690
Manufacturer Allnet
Here only 190,80 EUR
227,05 EUR incl. VAT

Further information for Allnet ALL-BM300 ISP Bridge Modem g.fast Supervectoring

General
Operating voltageDC 12V
Electricity consumption2A
Ethernet ports4 x RJ-45 10/100/1000 Mbps
Line port1 x RJ-11 / terminal block combo
POTS/ISDN connection1 x RJ-11
USB ports2 x USB 3.0
Maximum bandwidth1 Gbps symmetric
Supported profilesg.fast 106MHz, g.fast 212MHz, VDSL2 Super-Vectoring 35b, VDSL2 Profile 17A
StandardsITU-T G.9700/G.9701, ITU-T G993.2, IEEE 802.3/802.3u/802.3ab
Splitter functionIntegrated
QoS8 Queue, MFC/DSCP
Jumbo framesup to 1600 bytes MTU
Web managementHTTP/HTTPS
SSL securitysupported
Remote managementsupported
Configuration backup/restoresupported
Operation temperature0° to 50° C
Storage temperature-20° to 70° C
Air humidity10 - 90% non-condensing
CertificationsCE, FCC, RoHS
The Allnet ALL-BM300 is an ISP Bridge Modem for use in Industry-Electronics environments, supporting VDSL2 and G.fast technologies. It serves as a managed Slave in a point-to-point connection and enables access to high-speed internet over existing copper infrastructure. The device is specifically designed for FTTpd and FTTN applications, where data transmission occurs over two wires. The maximum bandwidth reaches up to 1 Gbps symmetrically, with the modem supporting both the g.fast 106MHz and g.fast 212MHz profiles. Additionally, it is backward compatible with VDSL2 Super-Vectoring Profile 35b (up to 250 Mbit/s) and VDSL2 Profile 17A (up to 100 Mbit/s), enabling flexible use with various connection types.

Applications

The ALL-BM300 is suitable for industrial and commercial environments where a stable, high-speed internet connection over existing copper lines is required. It is frequently used in combination with the ALL-BM310 Bridge-Master to implement a point-to-point g.fast solution. The integrated POTS/ISDN splitter function allows simultaneous use of analog telephony and broadband transmission over the same 2-wire pair, simplifying installation in existing telephone connections. The devices are designed for use in FTTpd (Fiber to the Premises) and FTTN (Fiber to the Node) environments, where the final stretch still uses copper.

Functions and Features in Detail

The modem features four RJ-45 Ethernet ports with 10/100/1000 Mbps speed, used for connecting to a router, firewall, PC, or MAC. An RJ-11 / terminal block combo line port enables connection to the telephone line, with the combination of plug and screw terminal allowing flexible mounting. A separate RJ-11 port is provided for connecting an analog telephone. Device configuration is performed via a web interface with HTTP/HTTPS support and SSL security. It is possible to configure a VLAN ID, which is relevant for networks with specific segmentation requirements. Remote management and monitoring, as well as configuration backup and restore functions, simplify maintenance and operation.

Technology Explained Simply

The ALL-BM300 operates according to the ITU-T G.9700/G.9701 standards for G.fast and ITU-T G993.2 for VDSL2. It supports the G.fast 106/212 dual-band profile, enabling higher bandwidth. The Supervectoring technology reduces interference between signals and increases connection stability. The on-board surge protection function for the line port protects the device from voltage spikes. Jumbo frames with an MTU of up to 1600 bytes optimize data transmission efficiency. The QoS function with 8 queues and support for MFC/DSCP allows prioritization of data traffic, which is important for critical applications.

Compatibility and Accessories

The modem can be used in combination with the ALL-BM310 Bridge-Master as a point-to-point solution. Compatible accessories include KEFA (Phoenix® compatible) adapter plugs 2F, LED accessory screw terminal KEFA (Phoenix® compatible) plug 2 F, replacement power supply 12V/2.5A with KEFA (Phoenix® compatible), and cable TK TAE adapter, flat, TAE-F → RJ11/RJ12, bulk. These components support installation and operation, especially in industrial applications with specific connection requirements.

Installation and Mounting

Installation involves connecting the modem to the telephone line via the RJ-11/terminal block combo line port and connecting the LAN port to a router, firewall, or PC. Configuration is done via the web interface, with no further settings required. The integrated splitter function enables simultaneous use of telephony and internet. The devices are designed for operation in a temperature range of 0° to 50°C (operation) and -20° to 70°C (storage). Humidity should be between 10 and 90 %, without condensation.

Operational Advantages

The ALL-BM300 offers a cost-effective solution for accessing high-speed internet over existing copper lines. Support for VDSL2 and G.fast standards, along with compatibility with various profiles, ensures flexible use. The integrated splitter function and support for jumbo frames optimize network performance. The web interface with SSL security and remote management functions simplify maintenance. The on-board surge protection function increases the reliability of the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1776880
qrcode für Allnet ALL-BM300 ISP Bridge Modem g.fast Supervectoring