AIZO GE-KL200, EAN: 4290046000195

AIZO GE-KL200 terminal L relay switch actuator yellow

Installation > Home Automation > Home Automation - Others

AIZO GE-KL200 terminal L relay switch actuator yellow

Lieske Part No. 451935
Mfg Part No GE-KL200
EAN-Code 4290046000195
Manufacturer AIZO
Here only 133,95 EUR
159,40 EUR incl. VAT

Further information for AIZO GE-KL200 terminal L relay switch actuator yellow

General
Product typedigitalSTROM terminal block
Functionrelay switching actuator
Application arealighting control
Maximum load1400 W
ControldigitalSTROM commands
Switching functionOn/Off
ColourYellow
Connection230V line
The digitalSTROM terminal GE-KL200 from AIZO is a relay switching actuator for integrating lamps into a digitalSTROM network. It serves as an interface between existing 230V lighting installations and the digitalSTROM system, enabling control of lighting loads via the digital network. The terminal is specifically designed for use in home automation systems where central, programmable control of lighting elements is desired. It replaces conventional terminals in existing lamps, allowing the use of digitalSTROM functionality without extensive modifications to the electrical connection. The terminal is designed for controlling loads up to 1400 W, making it suitable for larger lamps or multiple luminaires in a room.

Applications

The GE-KL200 is intended for use in residential and commercial buildings where intelligent lighting control via a digitalSTROM network is desired. It is particularly suitable for lamps operated at 230V mains voltage and with high power consumption. The terminal is used in existing lighting installations to connect them to the digital control network without altering the electrical installation. It is not intended for dimmable applications, but serves exclusively for switching functions – i.e., turning lighting on and off.

Functions and Equipment in Detail

The GE-KL200 terminal functions as a relay switching actuator controlled by digital commands. These commands are transmitted via the digitalSTROM network, enabling the terminal to switch the connected load (e.g., a lamp) on or off. Control is carried out via the 230V line, and the terminal itself does not support dimming functions. The maximum load that can be connected to the terminal is 1400 W. This corresponds to a high power capacity sufficient for larger luminaires or multiple lamps in a room. The terminal is marked in yellow, which is conventionally used in the digitalSTROM system for lighting functions.

Technology Explained Simply

The GE-KL200 operates as an electronic switch activated via the digitalSTROM network. The 230V mains voltage is routed through the terminal, which, depending on receipt of a digital command (e.g., “On” or “Off”), either enables or interrupts the current flow to the connected lamp. Control is carried out via the digitalSTROM protocol, which enables bidirectional communication between devices. The terminal is thus an integral part of a digitalSTROM system, which can be controlled via a central control unit or mobile applications.

Compatibility and Accessories

The GE-KL200 terminal is specifically developed for use in the digitalSTROM system and requires integration into an existing or newly established digitalSTROM network. It is compatible with all digitalSTROM control devices capable of sending commands via the digital network. The terminal is integrated into existing lamps by replacing the conventional terminal with the GE-KL200. No additional adapters or converters are required, as the terminal is directly installed into the 230V line. Use is exclusively in conjunction with digitalSTROM systems – it is not suitable for other control protocols.

Installation and Mounting

Installation of the GE-KL200 is carried out by replacing the existing terminal in the lamp. The terminal is installed into the 230V line, with electrical connections made in accordance with regulations for electrical installations. Mounting requires basic knowledge of electrical installation, as work is carried out with 230V mains voltage. The terminal is activated via the digitalSTROM network, thereby integrating it into the system.

Operational Advantages

The GE-KL200 enables flexible and central control of lighting elements without requiring modifications to the existing electrical installation. Integration is achieved by replacing the terminal, saving time and costs. Control via the digitalSTROM network enables the use of scenarios, time schedules, or remote control via mobile devices. The maximum load of 1400 W makes the terminal suitable for larger applications without requiring additional switching devices. The terminal is specifically designed for lighting control, with the yellow color serving as an indicator for lighting functions in the digitalSTROM system.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/451935
qrcode für AIZO GE-KL200 terminal L relay switch actuator yellow