| General |
| Manufacturer | Agfeo |
| Compatibility | ST 42 (IP), ST 45 (IP) |
| Technology | EnOcean |
| Maximum number per system | 10 piece |
| Firmware requirement | from version 1.5 |
| Scope of delivery | En-module 42, module cover, installation instructions |
The Agfeo En-Module 42 is an optional expansion module based on
EnOcean technology, specifically developed for integration into AGFEO system telephones of types ST 42 (IP) and ST 45 (IP). It serves as a wireless transmit and receive module to integrate these system telephones as SmartHome central units in ES- and HyperVoice communication systems. By utilizing the
EnOcean technology, the module enables wireless communication with compatible EnOcean components, allowing intelligent home automation solutions to be implemented. The module belongs to the end device accessories category and is retrofitted into existing systems to provide wireless energy at respective locations and ensure optimal connections.
Applications
The En-Module 42 is intended for use in existing AGFEO ES systems, particularly in system telephones ST 42 (IP) and ST 45 (IP). It is used where wireless control of SmartHome components via the existing communication system is required. Integration takes place directly within the telephone, making the device the central interface for EnOcean-compatible sensors, switches, or actuators. The functionality is focused on controlling and monitoring SmartHome applications, with communication taking place via the EnOcean protocol.
Functions and Equipment in Detail
The module operates as a transmit and receive unit for EnOcean wireless signals. It enables bidirectional communication with EnOcean-compatible devices, allowing status messages from sensors or commands to actuators to be transmitted. Integration is achieved by installing the module into the system telephone, where it is protected by a module cover. The maximum number of modules that can be used per ES system is ten, enabling flexible scaling of the wireless infrastructure. The functions depend on the system firmware version, which must be current at the time of delivery.
Technology Explained Simply
The
EnOcean technology is based on wireless communication that operates without external power supply, as devices are powered by energy harvesting (e.g., from motion, light, or temperature). The En-Module 42 acts as a gateway, receiving EnOcean signals and forwarding them to the ES system, or conversely sending commands from the system to EnOcean devices. Communication takes place in the 868 MHz frequency band, which is approved for wireless applications in private and commercial environments. The wireless range depends on the environment, but the module is designed for indoor use. Firmware version 1.5 of the ES series is required to utilize the module’s functionality.
Compatibility and Accessories
The En-Module 42 is exclusively designed for AGFEO system telephones ST 42 (IP) and ST 45 (IP). It is not compatible with other telephone models or systems. The maximum of ten modules per ES system allows for decentralized distribution of wireless functions. Integration into the system requires no additional hardware components, as the module is installed directly into the telephone. Functionality is limited to use with EnOcean-compatible devices operating on the same communication protocol.
Installation and Mounting
Installation is performed by inserting the module into the system telephone ST 42 (IP) or ST 45 (IP). Mounting is supported by the included installation manual, which describes the necessary steps for installation and configuration. The module cover protects the module after installation. Configuration is done via the ES system, requiring firmware version 1.5 or higher. Setup is carried out as part of the system configuration, with communication to EnOcean devices handled through the module.
Operational Advantages
The En-Module 42 enables flexible expansion of existing AGFEO system telephones into SmartHome central units without requiring additional hardware or network infrastructure. Using EnOcean technology reduces installation costs, as no cabling is required. Wireless communication allows decentralized control of SmartHome components, with signals routed through the existing ES system. The maximum of ten modules per system offers flexibility in scaling. Integration requires no additional power supply, as the module is powered by the telephone.
Scope of Delivery
The scope of delivery includes the AGFEO En-Module 42, a module cover, and an installation manual. These components are required for installing and configuring the module in the system telephone. Batteries are not included.