| General |
| Operating voltage | 39 V |
| Amperage | 150 mA |
| Connection | RJ12 |
| Scope of delivery | Switching power supply with RJ12 connector, connecting cable RJ12-RJ12, installation manual |
The Agfeo power supply unit for STxx/STExx serves as an external power source for various system telephones from the ST and STE series. It is specifically designed for an operating voltage of 39 V and a current flow of 150 mA, and is connected to the end device via an RJ12 plug connection cable. The device is required when the telephone system is not powered via PoE (Power over Ethernet) or when additional power supply is needed for specific module configurations. It is compatible with models such as STE 30, STE 40, ST 31, ST 40 (S0, Up0, IP), ST 42 (IP), ST 45 (IP), ST 53 (IP), ST 54 IP, ST 56 (IP), and STE 56. Its use is particularly necessary when installing two modules in the ST 40 (U), for example, when combining an O-module with a BT-module.
Applications
This power supply is used in professional telecommunications environments where system telephones must be operated with a separate power supply. It is intended for use in S0 and Up0 networks and serves as a replacement or supplementary power source when the integrated power supply of the telephone is insufficient or unavailable. Applications include office environments, installation of IP telephones, or systems that do not support PoE functionality.
Functions and Equipment in Detail
The power supply unit provides a constant direct voltage of 39 V with a current of 150 mA. These values are required for the operational safety of the compatible system telephones. The device features an RJ12 connector that connects directly to the telephone. Additionally, an RJ12-RJ12 connection cable is included in the delivery scope, enabling the connection between the power supply and the end device. Installation is carried out according to the included installation manual, which describes the correct connection method and safety regulations.
Technology Explained Simply
Power is supplied via an external power unit that provides the necessary voltage and current for telephone functionality. The specification 39 V / 150 mA refers to the electrical parameters required for the safe operation of the devices. The RJ12 plug system is a standard in telecommunications technology and enables a secure and reliable connection.
Compatibility and Accessories
The power supply is designed for a range of Agfeo system telephones, including models such as STE 30, STE 40, ST 31, ST 40 (in S0, Up0, and IP variants), ST 42 (IP), ST 45 (IP), ST 53 (IP), ST 54 IP, ST 56 (IP), and STE 56. It is not intended for use with other manufacturers or models. Compatibility is limited to the specified types, with particular relevance for IP telephones that lack PoE support. The accessories include the power supply unit itself, the connection cable, and the installation manual.
Installation and Mounting
Installation is performed by connecting the RJ12 plug of the power supply to the telephone. The included RJ12-RJ12 cable is routed between the power supply and the telephone. Correct installation is supported by the included installation manual, which contains step-by-step instructions and safety guidelines. It is important to follow the manual to ensure a safe and proper installation.
Operational Advantages
Using this power supply ensures reliable power for system telephones, especially in configurations where the integrated power supply is insufficient. It enables the use of IP telephones without PoE support and ensures stable operation, even when additional modules are used. The simple installation and clear compatibility with the specified models facilitate integration into existing communication systems.