AG neovo P3WM010000001, EAN: 4710739599008

AG neovo P3WM010000001 wall mount

Monitors > Projector-Accessories > Ceiling Mounts

AG neovo P3WM010000001 wall mount

Lieske Part No. 387100
Mfg Part No P3WM010000001
EAN-Code 4710739599008
Manufacturer AG neovo
Here only 23,75 EUR
28,26 EUR incl. VAT

Further information for AG neovo P3WM010000001 wall mount

Design
Product colourBlack
Housing materialSteel
Logistics data
Harmonized System (HS) code85299097
Mounting
Maximum weight capacity18 kg
Minimum screen size38.1 cm (15")
Number of displays supported1
Maximum screen size81.3 cm (32")
Mounting typeWall
Minimum VESA mount75 x 75 mm
Maximum VESA mount100 x 100 mm
Panel mounting interface75 x 75,100 x 100 mm
Packaging content
ManualYes
Mounting kitYes
Packaging data
Package width135 mm
Package depth27 mm
Package height175 mm
Package weight420 g
Weight & dimensions
Width130 mm
Depth20 mm
Height140 mm
Weight360 g
The AG neovo WMK-01 is a wall mount for professional installation of flat panel displays. It is designed for secure attachment of displays to a wall and is suitable for use in indoor and outdoor environments. The mount is made of steel and features an anodized surface that prevents corrosion. Its slim design reduces the distance between the wall and the display, minimizing space requirements. The maximum load capacity is 18 kg, and the mount is designed for screens with a minimum size of 38.1 cm (15 inch) and a maximum size of 81.3 cm (32 inch).

Wall mounting and mounting interface
The WMK-01 is designed for wall mounting and supports VESA standard interfaces 75 x 75 mm and 100 x 100 mm. These interfaces are internationally recognized and allow compatibility with a wide range of flat panel displays featuring these mounting points. The mount consists of two components: a wall bracket and a display bracket, which are connected using screws. Installation is carried out on a flat wall, with the wall’s load capacity needing to be at least 18 kg. For wooden walls, the included screws D are suitable; for concrete walls, drilling holes with a diameter of 1/4 inch (6.35 mm) and a depth of 38.1 mm is required, into which wall anchors are inserted.

Functions and equipment in detail
The mount is suitable for use in various environments such as retail, healthcare, financial services, and public spaces, where space-saving and clean installation are important. The construction from high-quality steel ensures high stability and durability. The anodized surface protects against rust and is suitable for outdoor use. The mount does not allow rotation or tilting of the display, but provides a fixed, stable positioning.

Technology explained simply
The VESA standard interfaces 75 x 75 mm and 100 x 100 mm are universally applicable and enable mounting on a wide range of displays. The mount is dimensioned to cover the required mounting points without needing additional adapters. The maximum load capacity of 18 kg ensures secure mounting even for larger and heavier displays. The shallow depth of 20 mm allows the display to be positioned close to the wall, maximizing space savings.

Compatibility and accessories
The WMK-01 is compatible with all AG neovo displays supporting VESA interfaces 75 x 75 mm or 100 x 100 mm. The mount is specifically designed for the M-Series and S-15E models, with different screws (A, B, C, D) provided for installation. The included screws and wall anchors allow flexible installation on various wall materials. Cable management is facilitated by the spacing between the two mount components, allowing cables to be connected before installation.

Installation and mounting
Installation is carried out in several steps: first, the wall bracket is mounted on the wall, ensuring the arrow marking points upward. Then, the display bracket is attached to the back of the monitor using the provided screws. Cables should be connected before mounting, as access becomes difficult after the display is hung. Installation requires a Phillips screwdriver and, if necessary, a drill with a 1/4 inch (6.35 mm) bit for concrete walls.

Operational advantages
The WMK-01 provides a stable and secure mounting solution for flat panel displays weighing up to 18 kg. The shallow depth and robust steel construction ensure a space-saving and long-lasting installation. The anodized surface protects against corrosion and makes the mount suitable for outdoor use. Universal compatibility with VESA standard interfaces allows use with a wide range of displays, increasing flexibility in application.

Scope of delivery
The scope of delivery includes the display bracket, wall bracket, four screws A (M4-8 mm), four screws B (M4-15 mm), two screws C (M4-18 mm), four screws D (4-19 mm), four wall anchors, and a quick start guide. Screws C are specifically intended for the S-15E model, while screws A, B, and D are suitable for other AG neovo displays.

Product color and material
The mount is black and made of steel. The anodized surface provides a robust and weather-resistant coating that prevents rust. Dimensions are 130 mm (width) x 140 mm (height) x 20 mm (depth), and the product weight is 360 g.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/387100
qrcode für AG neovo P3WM010000001 wall mount