| General |
| Ethernet port | 1 x 1000 MBit/s RJ-45 |
| Fibre optic connection | 1 x 1000 MBit/s SC connector |
| Fibre optic standard | 1000Base-SX |
| DIP switch | for full-/half-duplex |
| MDI/MDI-X auto-crossover | supported |
| Auto-negotiation | supported |
| Overvoltage protection (EFT) | 3.000 VDC |
| Ethernet ESD protection | 4.000 VDC |
| Current supply | 12-48 VDC |
| Mounting | DIN rail and wall mounting |
| LFP (Link Fault Pass-Through) | supported |
| Operation temperature | -10 to 60 °C |
The EKI-2741SX-AE from Advantech is an industrial media converter that converts Gigabit Ethernet networks with copper cables and RJ-45 connectors into Gigabit fiber optic networks. It converts Ethernet signals into optical signals, making it particularly suitable for applications in the Fiber-to-the-Building field. The converter thus connects existing Ethernet infrastructures with fiber optic lines to increase transmission range and stabilize network performance.
Applications
The EKI-2741SX-AE is designed for industrial environments where a reliable and robust network connection is required. It is particularly suitable for building connections where fiber optic cables ensure data transmission over long distances. Possible applications range from factories and production facilities to energy supply networks and transportation systems, where high availability and interference resistance of the communication interface are critical.
Functions and Equipment in Detail
The converter features a 1000 MBit/s Ethernet port with RJ-45 connector and a 1000 MBit/s fiber optic port with SC connector, designed for 1000Base-SX devices. This enables direct connection of Ethernet networks with fiber optic infrastructures. DIP switches allow manual setting to full- or half-duplex mode, enabling the communication type to be adapted to the respective network topology. Additionally, the converter supports MDI/MDI-X auto-crossover, simplifying cabling as no additional crossover cables are required. The auto-negotiation function ensures automatic adjustment of transmission parameters to the connected device.
Technology Explained Simply
The EKI-2741SX-AE converts electrical Ethernet signals into optical signals transmitted over fiber optic cables. This is achieved via the integrated 1000Base-SX module, designed for short distances up to 550 meters (depending on fiber type). The integrated LFP function (Link Fault Pass-Through) transmits the fiber link status to the Ethernet port, allowing network devices to detect connection loss. Power supply is provided via a redundant input ranging from 12 to 48 VDC, increasing reliability in critical applications. Additionally, the converter offers overvoltage protection (EFT) of 3,000 VDC for the power line and Ethernet ESD protection of 4,000 VDC to protect devices from electrical disturbances.
Compatibility and Accessories
The converter is compatible with 1000Base-SX fiber optic devices and operates with SC connectors. It is designed for use in industrial networks and can be connected to other devices supporting the 1000Base-SX standard. Connection is made via standard fiber optic cables with SC connectors.
Mounting and Installation
Mounting is flexible, either on a DIN rail or on a wall. Installation requires no special tools, as fastening is done via integrated mounting elements. Connectors are clearly labeled, and DIP switch settings are easily accessible. The devices are designed for industrial environments, so robust mounting and secure cabling are recommended.
Advantages in Operation
The EKI-2741SX-AE offers high interference resistance and reliability due to integrated protection functions against overvoltage and electrostatic discharge. The redundant power supply increases availability, and the LFP function enables rapid fault detection in the network. The operating temperature range of -10 to 60 °C makes the converter suitable for a wide range of environments, including outdoor areas or industrial halls with variable temperatures. The combination of Ethernet and fiber optic ports enables flexible integration into existing networks.