| General |
| Ethernet port | 1 x 10/100 MBit/s RJ-45 |
| Fibre optic connection | 1 x 100 MBit/s SC, Single-mode/Multi-mode |
| LFP setting | Internal jumper |
| Flow control | Full- and half-duplex |
| Transmission type | Store-and-Forward |
| Auto-negotiation | supported |
| Current supply | Redundant 12–48 VDC |
| Mounting | DIN rail and panel mounting |
The EKI-2541S-AE from Advantech is an industrial media converter that connects Ethernet networks with fiber optic networks. It converts Ethernet signals via an RJ-45 port into optical signals transmitted through an SC fiber optic connector. This converter is designed for use in industrial environments where high immunity to interference and reliability are required. The use of fiber optic enables greater bandwidth and better immunity to electromagnetic interference compared to conventional copper cables.
Applications
The EKI-2541S-AE is suitable for applications requiring extended reach or interference-resistant data transmission, such as in production facilities, power supply networks, or transportation. It is frequently used to connect existing Ethernet infrastructures with fiber optic backbones, particularly in environments with high electromagnetic noise or over long distances, where copper cables reach their performance limits.
Functions and Features in Detail
The converter features a 10/100 MBit/s Ethernet port with an RJ-45 connector, suitable for both full-duplex and half-duplex transmissions. Flow control is supported to prevent data loss during overloads. Store-and-forward transmission ensures that data packets are fully received and checked before forwarding, enhancing network security. Auto-negotiation enables automatic adjustment of transmission rate and duplex mode between the converter and the connected device. The integrated MDI/MDI-X auto-crossover allows direct connection to other devices without additional cable reconfiguration.
Technology Explained Simply
The EKI-2541S-AE operates as a media converter, transforming the signal format from electrical Ethernet signals into optical signals. This is achieved via an SC fiber optic connector, compatible with both single-mode and multi-mode fibers. Support for single-mode fibers enables transmission over longer distances, while multi-mode fibers are used for shorter runs. The internal jumper for LFP (Link Fault Pass-Through) allows fault conditions in the fiber optic connection to be passed to the connected device, ensuring rapid fault detection.
Compatibility and Accessories
The converter is designed for use with standard Ethernet devices equipped with an RJ-45 connector. The fiber optic side is compatible with SC connectors for single-mode and multi-mode fibers. Power supply is provided via a redundant 12–48 VDC input, increasing device availability in critical applications. Flexible mounting options include DIN rail and panel mounting, enabling easy integration into existing enclosures.
t
Mounting and Installation
Installation is performed by securing the device to a DIN rail or directly to a control panel. Connections are clearly labeled, with the RJ-45 port designated for Ethernet connection and the SC port for fiber optic cables. Configuration is done via physical settings, particularly the internal LFP jumper, which can be activated or deactivated according to requirements.
Operational Advantages
Using the EKI-2541S-AE provides reliable and interference-resistant data transmission, especially in environments with high electromagnetic noise. The redundant power supply increases operational safety, and flexible mounting simplifies integration into existing systems. Support for auto-negotiation and MDI/MDI-X auto-crossover reduces installation complexity and minimizes cabling errors.